X635-Software

X635 Software Guide base on Raspberry Pi OS bullseye

1. To use the HDMI to CSI-2 bridge, you will need to enable Enable legacy camera support.

3. Again open a terminal window and type the following command:

sudo wget https://datasheets.raspberrypi.org/cmio/dt-blob-cam1.bin -O /boot/dt-blob.bin
#Download the required file /boot/dt-blob.bin

4. Reboot for the dt-blob.bin file to be read

sudo reboot

5. Open the Terminal and run the command to check if the HDMI to CSI-2 bridge is being seen by the operating system.

Note: You should get back supported=1, detected=1, indicating that the CSI-2 bridge is detected and supported by the operating system. If you get detected=0, then the CSI-2 bridge is not being seen by the operating system.

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher