Difference between revisions of "X635-Software"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
1. To use the HDMI to CSI-2 bridge, you will need to enable '''[[How to enable camera support in Raspberry Pi OS|Enable legacy camera support]]'''. | 1. To use the HDMI to CSI-2 bridge, you will need to enable '''[[How to enable camera support in Raspberry Pi OS|Enable legacy camera support]]'''. | ||
| − | |||
| − | |||
| − | |||
| − | |||
3. Again open a terminal window and type the following command: | 3. Again open a terminal window and type the following command: | ||
Revision as of 19:34, 24 April 2023
X635 Software Guide base on Raspberry Pi OS bullseye
1. To use the HDMI to CSI-2 bridge, you will need to enable Enable legacy camera support.
3. Again open a terminal window and type the following command:
sudo wget https://datasheets.raspberrypi.org/cmio/dt-blob-cam1.bin -O /boot/dt-blob.bin #Download the required file /boot/dt-blob.bin
4. Reboot for the dt-blob.bin file to be read
sudo reboot
5. Open the Terminal and run the command to check if the HDMI to CSI-2 bridge is being seen by the operating system.
X635-software-18.png
Enable comment auto-refresher