Difference between revisions of "X635-Software"

Revision as of 19:24, 24 April 2023

X635 Software Guide base on Raspberry Pi OS bullseye

To use the HDMI to CSI-2 bridge, you will need to enable Enable legacy camera support.

X635-software-18.png

@@ Line 2: / Line 2: @@
 <big>X635 Software Guide base on  Raspberry Pi OS bullseye</big>
-To use the HDMI to CSI-2 bridge, you will need to enable '''Enable legacy camera support'''.
+To use the HDMI to CSI-2 bridge, you will need to enable '''[[How to enable camera support in Raspberry Pi OS|Enable legacy camera support]]'''.
-Open a terminal window and type the following command:
- sudo raspi-config
-Then use the cursor keys to scroll down to "Interface Options".
-[[File:X635-software-03.png|700px]]
-Press the ‘Enter’ key
-[[File:X635-software-05.png|700px]]
-Make sure ‘Legacy Camera Enable/disable legacy camera support’ is selected and press the ‘Enter’ key. " Use the cursor keys to select  and press the ‘Enter’ key
-[[File:X635-software-09.png|700px]]
-Press ‘Enter’ again to confirm
-[[File:X635-software-12.png|700px]]
-Then select 'Finish' to exit.
-[[File:X635-software-20.png|700px]]
-Run the following command to reboot device
- sudo reboot
 [[File:X635-software-15.png|700px]]