Difference between revisions of "X635-Software"

Revision as of 19:11, 24 April 2023

X635 Software Guide base on Raspberry Pi OS bullseye

To use the HDMI to CSI-2 bridge, you will need to enable Enable legacy camera support.

Open a terminal window and type the following command:

sudo raspi-config

Then use the cursor keys to scroll down to "Interface Options".

Press the ‘Enter’ key

X635-software-18.png

@@ Line 6: / Line 6: @@
 Open a terminal window and type the following command:
   sudo raspi-config
-Then use the cursor keys to scroll down to "Interface Options" and press the ‘Enter’ key.
+Then use the cursor keys to scroll down to "Interface Options".
 [[File:X635-software-03.png|700px]]
+Press the ‘Enter’ key
 [[File:X635-software-05.png|700px]]