5,154
edits
Changes
X635
,{{GD Template Impl}}
[[File:X635-IMG-5461-2-Interface-Schematic-1.jpg|thumb|right|X635 V1.2 Interface Schematic]]
[[File:IMG-5461-acce+size.jpg|thumb|right|X635 V1.2 PCB Size]]
[[File:X635-acce.jpg|thumb|right|X635 V1.2 Packing List]]
[[File:IMG-5451.jpg|thumb|right|X635 V1.2]]
[[File:IMG-5453.jpg|thumb|right|X635 V1.2]]
[[File:IMG-5457.jpg|thumb|right|X635 V1.2 + Raspberry Pi CM4]]
[[File:IMG-5466.jpg|thumb|right|X635 V1.2 + Raspberry Pi CM4 + C235 Heatsink]]
==Note==
# '''Don't power via X635 USB-C socket when connect another PC to X635 USB-A'''.
# To '''enable the CM4 to be updated via rpiboot''', You have to put a jumper over the pins of "nBOOT" and "GND" on the 6-pin header.
# Please use only the '''screws(M2x3mm) for mounting the SSD''' come with this kit. Other screw size(length>3mm) will damage your Micro-SD card or the card socket!!!
==Overview==
The X635 is a ultra-compact carrier board specifically designed for the Raspberry Pi compute module 4.
It supports M.2 NVMe SSD expansion board which offers an easy and fast way to create storage solution. At the same time, it adds HDMI to CSI-2 bridge that converts HDMI stream to MIPI CSI-2 TX. The CM4 has been designed without video streaming input port except CSI-2 for camera input, and this carrier board can be used with CM4 in several applications that required Video Input.
==Features==
* HDMI input: 1080p30, 1080p25, 720p30, 720p25
* Supports HDMI audio capture via i2s
* Gigabit Ethernet socket supporting Power over Ethernet (POE) expansion(Need extra PoE module)
* HDMI output port supporting 4K display
* '''M.2 2242 KEYM ''' KEY M socket for NVMe SSD storage expansion* Supports booting from MicroSD, eMMC and faster '''M.2 2242 ''' NVME SSD
* USB2.0 Type-A connector for external USB hub and programming the CM4 eMMC
* 26pin expansion header includes power pins and GPIO pins
* Small size measuring just 55 x 70 x 18mm
==How to Power==
Power via <span style="color:red;">X635 USB-C 5V In</span>
But '''if a PC is connected to X635 USB-A, the PC's USB will supply power to the X635''', and don't connect extra power supply to X635 USB-C.
==How to Cool==
Aluminum Heatsink for Raspberry Pi Compute Module 4, please refer to [[C235]]
[[File:IMG-5466-C235.jpg|border|700px|none]]
==Packing List==
* 1 x X635 V1.2 Expansion Board
* 1 x USB2.0 to USB2.0 Cable (Length: 45cm/17.72inch)
* 2 x Mini HDMI to HDMI Cable (Length: 50cm/19.69inch)
* 1 x Screws Pack
==PCB dimention==
Dimensions source file (DXF): [[File:X635-PCB-V1.dxf]] - You can view it with Autodesk Viewer online
==User Manual==
* Hardware: [[X635-Hardware]]
* Software: [[X635-Software]]
==Video==
Thanks for the video from leepspvideo!
X635 User Guide: https://youtu.be/TDaY9tNKWs8
{{#ev:youtube|https://youtu.be/TDaY9tNKWs8}}
Test: https://youtu.be/rJ8T6LE0F88
{{#ev:youtube|https://youtu.be/rJ8T6LE0F88}}
==FAQ==
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q: Does the M.2 interface use the PCI-e or USB interface? What is the max usable transfer rate?
</div>
<div class="mw-collapsible-content">
A: The M.2 interface of X635 use PCI-e interface. The max usable transfer rate is 5Gbps.
</div>
</div>
<!--Add review function! -->