Difference between revisions of "X635"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
{{GD Template Impl}} | {{GD Template Impl}} | ||
==Foreword== | ==Foreword== | ||
− | # Don't power the X635 via USB Type-C socket when it is connected to another PC via the USB Type-A connector. | + | # '''Don't power the X635 via USB Type-C socket when it is connected to another PC via the USB Type-A connector'''. |
− | # To enable the CM4 to be updated via rpiboot, You have to put a jumper over the pins of "nBOOT" and "GND" on the 6-pin header. | + | # To '''enable the CM4 to be updated via rpiboot''', You have to put a jumper over the pins of "nBOOT" and "GND" on the 6-pin header. |
− | # Please use only the screws(M2x3mm) for mounting the SSD come with this kit. Other screw size(length>3mm) will damage your Micro-SD card or the card socket!!! | + | # Please use only the '''screws(M2x3mm) for mounting the SSD''' come with this kit. Other screw size(length>3mm) will damage your Micro-SD card or the card socket!!! |
==Overview== | ==Overview== |
Revision as of 16:09, 20 April 2023
Foreword
- Don't power the X635 via USB Type-C socket when it is connected to another PC via the USB Type-A connector.
- To enable the CM4 to be updated via rpiboot, You have to put a jumper over the pins of "nBOOT" and "GND" on the 6-pin header.
- Please use only the screws(M2x3mm) for mounting the SSD come with this kit. Other screw size(length>3mm) will damage your Micro-SD card or the card socket!!!
Overview
The X635 is a ultra-compact carrier board specifically designed for the Raspberry Pi compute module 4.
It supports M.2 NVMe SSD expansion board which offers an easy and fast way to create storage solution. At the same time, it adds HDMI to CSI-2 bridge that converts HDMI stream to MIPI CSI-2 TX. The CM4 has been designed without video streaming input port except CSI-2 for camera input, and this carrier board can be used with CM4 in several applications that required Video Input.
Features
- Based on the Raspberry Pi Compute Module 4 and Compatible with all variants
- Takes in HDMI input and converts to CSI-2 that looks like a camcorder input
- HDMI Full HD capture based on the TC358743 chip
- HDMI input: 1080p30, 1080p25, 720p30, 720p25
- Supports HDMI audio capture via i2s
- Gigabit Ethernet socket supporting Power over Ethernet (POE) expansion
- HDMI output port supporting 4K display
- M.2 2242 KEYM socket for NVMe SSD storage expansion
- Supports booting from MicroSD, eMMC and faster M.2 2242 NVME SSD
- USB2.0 Type-A connector for external USB hub and programming the CM4 eMMC
- 26pin expansion header includes power pins and GPIO pins
- Small size measuring just 55 x 70 x 18mm
Packing List
- 1 x X635 V1.2 Expansion Board
- 1 x Screws Pack
Enable comment auto-refresher
Anonymous user #1
Permalink |
Walker