2,869
edits
Changes
Jump to navigation
Jump to search
no edit summary
{{GD Template Impl}}
This wiki describes how to use x630 on the Raspberry Pi OS. <span style="color:red;">Note: The software can currently be used directly on Raspberry Pi 4B, 3B+/3B/Zero series. Software support for Raspberry Pi 5 software is not available which need to be tested. The Raspberry Pi Foundation has updated several versions recently; The use guide of X630 depends on the official Raspberry Pi OS version you are using. Different versions have different usage methods. If you have some questions, please contact us and attach the os version you are using.(<span style="color:red;">Email: support@geekworm.com</span>)
==For Raspberry Pi OS==
'''NOTE:''' Since the X630 V1.5 version removes the software reset&hardware reset DIP switch, for the V1.5 version, please ignore the use of software reset or directly visit to [[X630-Hardware-Reset]] X630 v1.3 has two reset mode: '''Hardware reset''' and '''Software reset''' modes;
First, please confirm & select your reset X630 work mode based on your hardware and OS (default is software reset mode) according the picture; After November 2021, the default factory mode is hardware mode;
We found that some users prefer hardware mode, so our factory default settings have been changed to hardware mode
Explain：
* Hardware reset: After starting RASPISTILL or RASPIVID <span style="color:red;">once</span> then you will need to reboot Raspberry Pi to restart it again (Please use when operating system cannot control the X630 module via GPIO509)
* Software reset: Starting RASPISTILL or RASPIVID <span style="color:red;">multiple times</span> and don't need to reboot Raspberry Pi ('''Recommend''').* Default setting is 'Software Hardware reset';.
* Please remove the yellow protective film before change dip switch.
<hr/>