Changes

This wiki describes how to use x630 on the Raspberry Pi OS. <span style="color:red;">Note: The software can currently be used directly on Raspberry Pi 4B, 3B+/3B/Zero series. Software support for Raspberry Pi 5 software is not available which need to be tested. The Raspberry Pi Foundation has updated several versions recently; The use guide of X630 depends on the official Raspberry Pi OS version you are using. Different versions have different usage methods. If you have some questions, please contact us and attach the os version you are using.(<span style="color:red;">Email: support@geekworm.com</span>)

'''NOTE:''' Since the X630 V1.5 version removes the software reset&hardware reset DIP switch, for the V1.5 version, please ignore the use of software reset or directly visit to [[X630 -Hardware-Reset]] X630 v1.3 has two reset mode: '''Hardware reset''' and '''Software reset''' modes, we strongly recommend you ;  You can use hardware reset mode if you use it on raspberry pi hardware or raspberry pi os, software reset uses GPIO 509 to reset operation through GPIO, which can prevent you from restarting the Raspberry Pi repeatedly, which is very convenient. And on other hardware platforms,   The user guide of X630 actually reserves pins is similar to facilitate you to use custom GPIO pin to implement software reset operations or use directly [[HDMI TO CSI-2|C779]] when X630 is in hardware reset mode., but X630 supports audio when used with X630-A2, and [[HDMI TO CSI-2|C779]] does not support audio

* Software reset: Starting RASPISTILL or RASPIVID <span style="color:red;">multiple times</span> and don't need to reboot Raspberry Pi ('''Recommend''').* Default setting is 'Software Hardware reset';.