Changes

This <span style="color:red;">X630-A8 is the PCIe KVMan accessory for [[PiKVM-A8 ]] (Raspberry Pi 4 based KVM over IP, PCIe version)，the complete kit that allows user or other Geekworm PiKVM version, please refer to realize a '''[[PiKVM]] '''</ KVM project with Raspberry Pi 4. span>

NO extral PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection wire requirevia your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, easy to assemble and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can useyour remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly.It's true hardware-level access with no dependency on any remote ports, protocols or services!

PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote NO extral connection via your Raspberry Pi wire require, easy to turn on/off or restart your computer, configure the UEFI/BIOS, assemble and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services! <span style="color:red;">X630-A8 is an accessory for PiKVM-A8 (Raspberry Pi 4 based KVM over IP, PCIe version)，the complete kit or other PiKVM version, please refer to '''[[PiKVM]]'''</span>

* * 1 x FPC cable (Length: 5cm) * * 1 x ATX Control Cable (Length: 52cm) * * 1 x Motherboard Internal USB 2.0 9-pin Female Header to TYPE-C USB OTG Cable (Length: 50cm) * * 1 x USB3.0 IDC to TYPE-C (Length: 45cm) * * 1 x Standard height PCIe Add-in Card I/O Bracket* * 4 x M2.5x12mm F/F Spacers* * 8 x M2.5x6mm Screws

* * 2 x PM3x6mm Screws