Changes

[[File:X630-A3A8-Compare-IMG-6284.jpg|thumb|right|X630-A8 V1.7 VS V1.8]][[File:X630-A8-IMG-4948.jpg|thumb|right|X630-A8-Front]][[File:X630-A8-IMG-4949.jpg|thumb|right|X630-A8-Rear]][[File:X630-A8-Standard-height-PCIe-bracket.jpg|thumb|right|X630-A8 Standard height PCIe Add-in Card I/O Bracket]][[File:X630-A8-IMG-4942-Interface.jpg|thumb|right|X630-A8]][[File:X630-A8-IMG-42364940-1.JPGjpg|thumb|right|X630-A3 A8]][[File:01-X630-A8-acce.jpg|thumb|right|PiKVM shield-A8: X630+X630-A8 for Pi 4]]

This <span style="color:red;">X630-A8 is the PCIe KVMan accessory for [[PiKVM-A8 ]] (Raspberry Pi 4 based KVM over IP, PCIe version)，the complete kit that allows user or other Geekworm PiKVM version, please refer to realize a '''[[PiKVM]] '''</ KVM project with Raspberry Pi 4. span>

NO extral PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection wire requirevia your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, easy to assemble and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can useyour remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly.It's true hardware-level access with no dependency on any remote ports, protocols or services!

PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote NO extral connection via your Raspberry Pi wire require, easy to turn on/off or restart your computer, configure the UEFI/BIOS, assemble and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services! <span style="color:red;">X630-A8 is an accessory for PiKVM-A8 (Raspberry Pi 4 based KVM over IP, PCIe version)，the complete kit or other PiKVM version, please refer to '''[[PiKVM]]'''</span>

* '''* 1 x X630-A8 V1.7 Expansion Board'''

* 1 x ATX Control Cable (Length: 52cm) * 1 x Motherboard Internal USB 2.0 9-pin Female Header to TYPE-C USB OTG Cable (Length: 50cm) * 1 x USB3.0 IDC to TYPE-C (Length: 45cm) * 1 x Standard height PCIe Add-in Card I/O Bracket * 4 x M2.5x12mm F/F Spacers * 8 x M2.5x6mm Screws* '''* 1x X630-A8-CAB V1.1 Camera Adapter board'''