X630-A4
Contents
Overview
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
Features
Designed especially for PiKVM ( Raspberry Pi-based KVM over IP) Pefectly Works with the latest Raspberry Pi Zero 2W (Without Soldering Header) Fully compatiblie with PiKVM OS Control a server and computer using a web browser HDMI Full HD capture based on the TC358743 chip OTG Keyboard & mouse; Mass Storage Drive emulation Hardware Real Time Clock (RTC) with CR1220 coin battery socket Equipped with solid-state relays to protect RPi GPIO pins from computer and ESD spikes ATX control via RJ45 connector - Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely Reserves the 4-pin header & spacers for I2C OLED display Reserves the PH2.0-2P 5V power connector for fan and other devices Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required Power using USB Type-C USB On-the-go (OTG) using USB Type-C
Packing List
- 1 x X630-A4 HAT Shield for PiKVM
- 8 x KM2.5 x 3
- 2 x M2.5 15 Specer
- 3 x M2.5 4+4 Specer
- 1 x M2.5 10+4 Specer
- 1 x M2.5 15+4 Specer
Enable comment auto-refresher