Difference between revisions of "X450/X5500 Software Configuration"
Line 43: | Line 43: | ||
<pre> | <pre> | ||
sudo nano /boot/config.txt | sudo nano /boot/config.txt | ||
+ | |||
#Remove the line or add the '#' at the begin of this line; | #Remove the line or add the '#' at the begin of this line; | ||
#dtparam=audio=on | #dtparam=audio=on | ||
Line 51: | Line 52: | ||
#Add the following line at the end of config.txt file; | #Add the following line at the end of config.txt file; | ||
dtoverlay=hifiberry-dac | dtoverlay=hifiberry-dac | ||
− | #Save config.txt file(Ctrl-x then Y) | + | |
− | + | #Save config.txt file(Ctrl-x then Y), then reboot raspberry pi | |
sudo reboot | sudo reboot | ||
</pre> | </pre> |
Revision as of 17:45, 21 April 2020
Contents
Volumio (Version: 2.118)
Select the“PLAYBACK OPTIONS”menu, Turn on "I2S DAC" and select "Hifiberry DAC" under“DAC Model.” Then reboot and you are done.
Moode Audio Player (Version: 3.1)
Simply select the“Configure”menu, select "Audio" under "configuration settings", then select "HiFiBerry DAC" under “I2S audio device", Finally click “SET”and reboot.
OSMC (Version: 20170210)
1. Select My OSMC and enter "Pi Config".
2. Select "Hardware Support" and choose your "hifiberry-dac-overlay" in the Soundcard Overlay parameter.
3. Restart your Raspberry Pi.
4. Select "Settings".
5. Select "System".
6. Select "Audio output" and set the Audio output device parameter to ALSA: Default (snd_rpi_hifiberry_dac Analog)
7. Done!
Raspbian Stretch
The following operation is in the config.txt file
REMOVE THE DRIVER FOR THE ONBOARD SOUND
sudo nano /boot/config.txt #Remove the line or add the '#' at the begin of this line; #dtparam=audio=on
CONFIGURE DEVICE TREE OVERLAY FILE
#Add the following line at the end of config.txt file; dtoverlay=hifiberry-dac #Save config.txt file(Ctrl-x then Y), then reboot raspberry pi sudo reboot
Enable comment auto-refresher
Anonymous user #2
Permalink |
Harry
Anonymous user #1
Permalink |
Lisa