I see a lot of people knocking this board, i just want to say it's working great for me, I put virtual here server on a pi zero WH and it works amazingly. I can take my portable usb hub out to the garage and plug my laser cutter into it, then go back to my office and burn for a couple hours only using half battery or so. I didn't do anything special.
I was hesitant to buy this product because of some of the comments but I am glad I bought it. It is exactly what I need. I had a spare battery lying around without use, so I needed a UPS hat. The USB hub was a great extra. But, many comments here and reddit posts complained about USB hub not working. I had an impression that it is not working for everyone. But I can confirm, it is working for me. lsusb detects my usb drives (sandisk cruzer blade) and I can mount them. So if you needed a confirmation that this is a working product, you got it. It does work. Both the USB hub and the UPS part. Maybe the other guys had faulty units, dunno.
Hi, I'm also having the same problem with the USB ports, none of them are working. They are powering things, but no data goes through. I have confirmed the pogo pins are making contact, and have tried using a USB hub on the pi alone, without the UPS, and the hub works fine, so there's something wrong with this UPS. Does it need a ferrite ring?
I am having the same issue, no data on the usb ports, it just turn it on but no data, I cannot see the hub on lsusb, I can see this is a known issue a lot of post here with the same issue...
Hello, the 4 blue LEDs of the X306 UPS Board indicate battery charging and discharging levels of 25%, 50% , 75% and 100%, can only roughly display the percentage of the battery
Hi, we are sending you an email, hoping that you can provide some hardware installation pictures. The products are tested before leaving the factory, and there will be basically no quality problems. I hope you can check the test ponits under the Raspberry Pi Zero 2W, are these test ponits clean and the pogo pins align well with each test pins? This may affect the USB ports which make it not work.
Hello, I'm sorry, we don't have the X306 shell at present, but we have the specific information of X306 PCB dimention File:X306V1.1.dxf, you can make a shell by other means, such as 3D printing
Enable comment auto-refresher
Anonymous user #15
Permalink |
Anonymous user #14
Permalink |
Lisa
Anonymous user #13
Permalink |
Anonymous user #11
Permalink |
Walker
Anonymous user #9
Permalink |
Anonymous user #10
Anonymous user #12
Anonymous user #8
Permalink |
Anonymous user #7
Permalink |
Walker
Anonymous user #6
Permalink |
Walker
Anonymous user #5
Permalink |
Walker
Anonymous user #3
Permalink |
Anonymous user #4
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa