5,142
edits
Changes
Jump to navigation
Jump to search
[[Category:Knowledge]]
X301
,[[File:X301-IMG-3990-Packing-List.jpg|thumb|right|X301 Packing List]]
[[File:X301-IMG-3965.jpg|thumb|right|X301 shield + C296]]
[[File:X301-pcb.png|thumb|right|X301 pcb size]]
==Overview==
This X301 is a 2.5-inch SATA HDD/SSD storage expansion board with USB HUB function for the raspberry pi zero 2 w or raspberry pi zero w.
Geekworm has provided X-series storage solutions for Raspberry Pi since 2017, our storage expansion boards have been continuously improved with the upgrade of Raspberry Pi. Many Geekworm users contacted us to inquire about the Zero 2 W storage expansion board, that is why the X301 is born.
'''Note:'''
* X301 is not only compatible with Raspberry Pi Zero 2W, NOT support other raspberry pi zeroboard.* Since the X301 expands the Micro OTG port of the Raspberry pi zero motherboard into a USB HUB, the Micro micro OTG port of the pi zero motherboard can no longer cannot be used.as it is occupied by USB HUB
==Features==
* Ideal storage solution for Raspberry Pi Zero 2 W / Zero W - 2.5" SATA HDD/SSD Shield
* USB Hub for Raspberry Pi
* Power Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)* Supports Multiple Transaction Translators for optimum performance* Powers the raspberry pi and X301 Raspberry Pi via test pins Pogo Pins - No additional wire no wiring & soldering required* LED green indicates RPi activity status and LED blue indicates hard drive status* Supports operating system installation and booting from your HDDUSB Attached SCSI Protocol (UASP) ==How to Power==Power via USB C 5V In port of X301 Power supply requirement: 5Vdc +/SSD-5% , ≥3A ==How to Cool==Recommend to use with Geekworm [[C296]] aluminum heatsink for Raspberry Pi Zero 2 W.[[C296]] also compatible with raspberry pi zero w by using thermal pads of different thicknesses, thermal pads for raspberry pi zero w is not included.
==Packing List==
* 1 x X301 V1.0 Expansion Board
* 4 x F/F M2.5*12 mm Spacers
* 4 x CM2.5*5mm Screws
* 2 x CM2.5*10mm Screws
* 2 x M3*5mm Screws (to fix HDD)
==PCB dimention==
* X301 Dimensions source file (DXF): [[File:X301-V1.0-DWG.dxf|X301 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
==User Manual==
==FAQ==
Q1: Does the X301 support boot from the ssd/hdd?
A: No, the Raspberry Pi Zero 2W does not support boot from SSD/HDD.
<!--Add review function! -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]