8,941
edits
Changes
Jump to navigation
Jump to search
X205
,no edit summary
{{GD Template Impl}}
[[File:X205 165p3.jpg|thumb|right|X205]]
[[File:IMG_7961.jpg|thumb|right|X205]]
[[File:IMG_7960.jpg|thumb|right|X205]]
[[File:X205 860p1.png|thumb|right|X205]]
==Overvieww==
X205 Expansion Board for Raspberry Pi 2 Model B / Raspberry Pi B+ (SKU:411771)
== Features ==
Input Voltage: 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
RS232 serial communications: Control the Raspberry Pi over RS232 or connect to external serial accessories
RS485 serial communications:
* You will be able to have a communication port for your field bus directly connected to your RPi!
* It will allow up to 32 devices to communicate through the same data line over a cable length of up to 4,000ft with a maximum data rate of 10Mbit/s.
Audio:
*3.5mm MIC in jack
*3.5mm stereo audio jack
*Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
Wireless:
*WiFi (IEEE 802.11b/g/n) with external antenna
*IR sensor (38KHz)
USB Storage:
*Self-powered USB hub with 3 ports
Real-time clock (RTC):
*Based on DS3231SN with included CR2032 battery
GPIO Control：
*8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current
Misc：
*Power output socket
*Camera flex slot so camera can still be used with the expansion board attached
*DIP switch to remove connection from RPi’s pin header
*Directly connected on top of the Raspberry Pi using the board GPIO header pins
*No wiring nor soldering is required
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
*Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
[[Category:Product Manual]]
[[Category:Raspberry pi]]
<comments/>
[[File:X205 165p3.jpg|thumb|right|X205]]
[[File:IMG_7961.jpg|thumb|right|X205]]
[[File:IMG_7960.jpg|thumb|right|X205]]
[[File:X205 860p1.png|thumb|right|X205]]
==Overvieww==
X205 Expansion Board for Raspberry Pi 2 Model B / Raspberry Pi B+ (SKU:411771)
== Features ==
Input Voltage: 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
RS232 serial communications: Control the Raspberry Pi over RS232 or connect to external serial accessories
RS485 serial communications:
* You will be able to have a communication port for your field bus directly connected to your RPi!
* It will allow up to 32 devices to communicate through the same data line over a cable length of up to 4,000ft with a maximum data rate of 10Mbit/s.
Audio:
*3.5mm MIC in jack
*3.5mm stereo audio jack
*Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
Wireless:
*WiFi (IEEE 802.11b/g/n) with external antenna
*IR sensor (38KHz)
USB Storage:
*Self-powered USB hub with 3 ports
Real-time clock (RTC):
*Based on DS3231SN with included CR2032 battery
GPIO Control：
*8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current
Misc：
*Power output socket
*Camera flex slot so camera can still be used with the expansion board attached
*DIP switch to remove connection from RPi’s pin header
*Directly connected on top of the Raspberry Pi using the board GPIO header pins
*No wiring nor soldering is required
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
*Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
[[Category:Product Manual]]
[[Category:Raspberry pi]]
<comments/>