X1007

From Geekworm Wiki
Jump to navigation Jump to search

X1007 V1.1
X1007 V1.1
X1007 V1.1
X1007 V1.1


Important Notes

  • The X1007 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
  • Older SATA drives with less efficient flash media may not perform as well as newer drives
  • New SATA HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.

Overview

X1007 PCIe to 2 ports SATA HDD/SSD expansion board, designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. This board facilitates the simultaneous connection of two 2.5-inch HDDs/SSDs, unleashing the full potential of your storage capabilities, with SATA 3.0 interface speeds reaching up to 5Gbps.

The X1007 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favorite HATs while also utilizing this expansion board. Additionally, the X1007 and your HDDs can be powered from Raspberry Pi5 via pogo pins, streamlining the power supply to a single source.

The X1007 serves as the perfect storage solution for establishing a home media center or constructing a network-attached storage (NAS) system. It empowers you to store and stream your personal collection of videos, music, and digital photos within the confines of your home or remotely from anywhere around the globe..

Features

  • Compatible With Raspberry Pi 5B
  • Supports the connection of two 2.5-inch HDD/SSD to your Raspberry Pi 5 simultaneously
  • Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
  • Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
  • Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
  • Compatible with SATA 6G, 3G, and 1.5G hard drives
  • Features plug-and-play installation for ease of setup
  • LED indicators display power and drive status
  • Powered from Raspberry Pi5 via pogo pins, streamlining the power supply to a single source
  • Compatible with the official active cooler without compromising cooling performance
  • Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
  • PCB Size: 164.5mm x 71.85mm

How to Power

Power supply: 5dc +/-5% ≥3A via FFC & pogo pins

Ports & Connectors

  • PCIe connector x1 - 16-pin pitch0.5mm
  • SATA connectors x2 - 7+15P

Test & Reviews

Test Conditions

  • System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM
  • Interface board details: X1007 v1.1 PCIe to dual 2.5" SATA HDD/SSD Shield
  • Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 64bit, Release date: December 5th 2023)
  • Storage details: Samsung EVO 750 SSD, HITACHI Travelstar Z7K500 500G HDD


Testing disk drives read speed at PCIe2.0 with hdparm

X1007-Testing-disk-drives-read-speed-at-PCIe2.0-with-hdparm.png

Samsung EVO SSD: 430.69MB/s, HITACHI Travelstar HDD: 123.05MB/s

Packing List

  • X1007 V1.1 PCIe to dual 2.5" SATA HDD shield x1
  • PCIe FFC Cable 37mm x1
  • Screw pack x1

X1007-V1.1-IMG-7645-Packing List-1.jpg

User Manual

Hardware

X1007v1.1-dwg.png

X1007-V1.1-install.jpg

Software


Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #2

16 days ago
Score 0++
When will the housing be available

Anonymous user #1

18 days ago
Score 0++
The packing list image is actually listing four M2.5x10mm scrws. But these are M3?

Lisa

17 days ago
Score 0++
Hi,Yes,it's M3*8mm. we have updated the picture. Thanks