5,165
edits
Changes
{{GD Template Impl}}
[[File:X1007-Interface.jpg|thumb|right|X1007 V1.1]]
[[File:IMG-7760.jpg|thumb|right|X1007 V1.1]]
[[File:X1007-V1.1-UPSIDE.jpg|thumb|right|X1007 V1.1]]
[[File:X1007-Bottom.jpg|thumb|right|X1007 V1.1]]
==Important Notes==
* The X1007 is designed for data storage purposes and <span style="color:red;">does not currently support booting from HDD/SSD</span> with the existing firmware.
* Older SATA drives with less efficient flash media may not perform as well as newer drives
* New SATA HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
==Overview==
X1007 '''PCIe to 2 ports SATA HDD/SSD expansion board''', designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. This board facilitates the simultaneous connection of '''two 2.5-inch HDDs/SSDs''', unleashing the full potential of your storage capabilities, with SATA 3.0 interface speeds reaching up to 5Gbps.
* Compatible with the official active cooler without compromising cooling performance
* Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
* PCB Size: 164.5mm x 71.85mm
==How to Power==
'''Power supply:''' <span style="color:red">5dc +/-5% ≥3A</span> via FFC & pogo pins
==Ports & Connectors==
* PCIe connector x1 - 16-pin pitch0.5mm
* SATA connectors x2 - 7+15P
==Test & Reviews==
'''Test Conditions'''
* System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM
* Interface board details: X1007 v1.1 PCIe to dual 2.5" SATA HDD/SSD Shield
* Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 64bit, Release date: December 5th 2023)
* Storage details: Samsung EVO 750 SSD, HITACHI Travelstar Z7K500 500G HDD
'''Testing disk drives read speed at PCIe2.0 with hdparm'''
[[File:X1007-Testing-disk-drives-read-speed-at-PCIe2.0-with-hdparm.png]]
Samsung EVO SSD: 430.69MB/s, HITACHI Travelstar HDD: 123.05MB/s
==Packing List==
* X1007 V1.1 PCIe to dual 2.5" SATA HDD shield x1
* PCIe FFC Cable 37mm x1
* Screw pack x1
[[File: X1007-V1.1-IMG-7645-Packing_List-1.jpg | 500px]]
==User Manual==
DXF File:
* [[File:X1007-V1-DWG.dxf]]
===Hardware===
[[File: X1007v1.1-dwg.png| 800px]]
[[File: X1007-V1.1-install.jpg | 800px]]
===Software===
* X1007 software tutorials: [https://suptronics.com/Raspberrypi/Storage/x1007-v1.1_software.html X1007 Software]
<!--Add review function! -->