Changes

X1001

212 bytes added, 19 April

* If you find that the SSD is not working properly, it is possible that the power supply of SSD is not enough, then you need to check the current requirement of your SSD to decide whether power the SSD separately.

* The X1001 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS.

* Do not reserve the nut column to fix the 2230/2242/2260 SSD, users need to find proper way to fix the 2230/2242/2260 SSD.

==How to Power==

* 6 x M2.5x5mm Screws

* 1 x M2x4mm Screws (to fix M2 SSD)

* <span class="tb_red">1 x Copper pillar (Used to fix 2242/2230 SSDs, not to be added until April 2024)</span>

[[File:X1001-IMG-7881-2.JPG|800px]]

[[File:X1001-Packing-List-copper.jpg|800px]]

<!--

[[File:X1001-V1.1-IMG-6870-Packing-List.jpg|800px]]

-->

NOTE:

==User Manual==

*X1001 hardware description: [[X1001 Hardware]]

* X1001 software tutorials: [[NVMe SSD boot with the Raspberry Pi 5]]

* [https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf Raspberry pi 5 pcie connector pin out]

* Dimensions source file (DXF): [[File:X1001-V1.0.dxf]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online

===Video Guide===

Harry

Bureaucrats, Comment administrators, Interface administrators, Administrators

5,165

edits