Changes

X1001

1,103 bytes added, 19 April

→‎User Manual

[[File:X1001-V1.1-IMG-6860.jpg|thumb|right|X1001 V1.1 NVME M2 SSD Shield for Raspberry Pi 5]]

[[File:X1001-V1.1-IMG-6879.jpg|thumb|right|X1001 V1.1 NVME M2 SSD Shield for Raspberry Pi 5]]

[[File:Supported-SSD-1.jpg|thumb|right|X1001 Supported SSD]]

[[File:X1001-V1.1-IMG-6893.jpg|thumb|right|X1001 V1.1, supports installation of official active coolers]]

[[File:X1001-IMG-6856.jpg|thumb|right|X1001 FFC Connection]]

[[File:X100x-nvme-boot.jpg|thumb|right|User SD Copier to clone image]]

==Overview==

The X1001 V1.1 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.

~~{| class=~~This shield follows the new "~~wikitable~~PIP"~~! Model !! Compatible with !! NVMe M2 SSD Support~~|[https://datasheets.raspberrypi.com/pcie/pcie-connector-~~| [[X1000~~standard.pdf design guideline]~~] ||~~ from Raspberry Pi fundation ensuring that it will be easy to use and be supported long term by updates to Raspberry Pi ~~5 || Support 2230/2242 NVMe M2 SSD~~OS - though it is very early days and things are improving rapidly there! {{PCIe to NVME Sets}} |-== Important Notes==~~| [[X1001]] || Raspberry Pi 5 || Support 2230/2242/2260/2280~~ {{NVMe M2 SSD|Incompatibility List}}

==Features==

* FFC is only 30mm length.

* Supports installation of official active coolers;

* ~~Dual~~ PCIE LED Indicators~~:PCE~~: PCie - The LED will be on if the SSD is recognised; ~~ACT - M.2 disk activity (“ACT”).~~:According the [https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf Raspberry Pi Foundation's specification for PCIE], we have redesigned and retained only the ACT LED indicator in the next production batch (starting December 20, 2023).'''On: Power OK/Standby,Flashing: Reading/Writing'''

* Supports 2230/2242/2260/2280 NVME M2 SSD.

* Can power the X1001 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)

* If you find that the SSD is not working properly, it is possible that the power supply of SSD is not enough, then you need to check the current requirement of your SSD to decide whether power the SSD separately.

* The X1001 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS.

* Do not reserve the nut column to fix the 2230/2242/2260 SSD, users need to find proper way to fix the 2230/2242/2260 SSD.

==How to Power==

Can power the X1001 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)

[[File:Nvme-SSD-Current-Note.jpg|800px]]

==Test Reviews==

dtparam=nvme

Press '''Ctrl-O''', then enter, to write the change to the file.

Press '''Ctrl-X ''' to exit nano (the editor).

dd if=./Testingfile of=/dev/zero bs=100M count=10 oflag=dsync

'''Nomral PCIE 2.0 test data with '''''dd'' ''' command;'''

[[File:Nvme-test(pcie2).png]]

* 6 x M2.5x5mm Screws

* 1 x M2x4mm Screws (to fix M2 SSD)

* <span class="tb_red">1 x Copper pillar (Used to fix 2242/2230 SSDs, not to be added until April 2024)</span>

[[File:X1001-IMG-7881-2.JPG|800px]]

[[File:X1001-Packing-List-copper.jpg|800px]]

<!--

[[File:X1001-V1.1-IMG-6870-Packing-List.jpg|800px]]

-->

NOTE:

==User Manual==

*X1001 hardware description: [[X1001 Hardware]]

* X1001 software tutorials: [[NVMe SSD boot with the Raspberry Pi 5]]

* [https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf Raspberry pi 5 pcie connector pin out]

* Dimensions source file (DXF): [[File:X1001-V1.0.dxf]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online

===Video Guide===

Installation Video of X1001: https://youtu.be/X1GxqLKpPfg

X1001/X1001/X1002 Test Video by leepsvideo

https://youtu.be/XMA8e4r1AUQ

Which NVMe drives work with a Raspberry Pi 5?

https://youtu.be/3mUgVTBmKio

Thanks for the test video by Computadoras y Sensores!

https://youtu.be/DgIAfzBMTA0

==FAQ==

Harry

Bureaucrats, Comment administrators, Interface administrators, Administrators

5,169

edits