5. please check whether the voltage range is 11.5V-12.5V,
Q2:
QQ2: The V-BY-ONE input signal is connected to the adapter board, but there is no display when VBO OUT is connected to the LCD screen?
Answer:
1. Please check whether the V-BY-ONE cable is connected correctly and whether the line sequence corresponds to the screen end. 2. The power supply voltage of the driver board must be above 12V. Please check whether the single/dual sub-drive of the VBO OUT of the adapter board is consistent with the LCD single/dual sub-drive. 3. Whether the V-BY-ONE output of the drive board meets the VESA standard, it must be a single drive. 4. Test whether the HDMI OUT has a picture input and output. If there is a picture, it means that the VBO IN input is normal. Check the VBO OUT configuration and related wiring.
Q3:2. The power supply voltage of the driver board must be above 12V. Please check whether the single/dual sub-drive of the VBO OUT of the adapter board is consistent with the LCD single/dual sub-drive.
Q3. Whether the V-BY-ONE output of the drive board meets the VESA standard, it must be a single drive. 4. Test whether the HDMI OUT has a picture input and output. If there is a picture, it means that the VBO IN input is normal. Check the VBO OUT configuration and related wiring. Q3: The HDMI output screen size is normal, but the screen color is not normal?
Answer:
1. The V-BY-ONE signal data format does not match the configuration of the adapter board, please check the data BIT, 6BIT, 8BIT, 10BIT?
Q4: Q:The HDMI output screen size is abnormal or the position is shifted?
A:Please adjust the screen parameters for the V-BY-ONE signal board, strictly follow the VESA standard configuration
Q5:
QQ5: HDMI output screen jitter, flickering and other unstable phenomena?
A: Please check the V-BY-ONE signal parameter configuration, turn off the V-BY-ONE spread spectrum (NOSSC), and turn on the FREERUN function,then