2,841
edits
Changes
Jump to navigation
Jump to search
| Example || Example
|-
| Example || Example
T208
,| KEY FEATURES ||
Smart and powerful Uninterruptible Power Supply (UPS)
* - Provides continuous operations for up to 10~30hours (depending on battery type and qty used)* - Max 5.1V 8000mA Power Backup for even the most demanding Jetson Nano set ups* - 6-cell 18650 lithium Ion holder* - Can work with 1/2/3/4/5/6 18650 lithium Ion batteries* - Supports 3A fast battery charging* - Integrated battery protection circuit* - Integrated over current protection and over voltage protection* - Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c)* - Integrated TI's 10-A fully-integrated synchronous boost converter* - Intelligent automatic charging and discharging* - On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%* - On-board blue LED show the status of power on/off
Intelligent and safe power management
* - On-board push button to control power on /off (- Press-ON, Hold the button pressed at least 3s -OFF)* - AC power loss or power adapter failure detection (LED and GPIO indication)* - Automatic powering off after system shutdown using the GUI* - Optional to enable Auto power on when power applied or restored* - Ultra-low standby power consumption of μA to maximize battery life* - Integrated IN-to-SYS pass-through path to pass the input voltage to the system* - Operate in both charge mode and boost mode to allow full system management and battery power management* - Advanced system power path management avoids frequent charging and extend battery life* - Advanced system power path management allows 3A fast charging and powering Jetson Nano at the same time* - Powers the Jetson Nano via the 40-pin header - no additional cabling required* - Power input jack (5.5*2.5mm) and XH2.54 connector convenient for power input* - On-board PH2.0 connector allows to connect external power switch and DIY your perfect case* - On-board XH2.54 power output connectors allow to power other devices* - Mounting holes and standoffs provide mechanical stability of the Jetson Nano and T208 assembly| SPECIFICATIONS || * Power input : 5Vdc ±5%, ≥4A* UPS output : 5.1V ±5% Max 8A* UPS charging current: 2A via Micro-USB socket, 3A via DC jack * Terminal Battery Voltage : 4.24V * Recharge Threshold : 4.1V
|-
| Example NOTES || Example * Do not apply power to your Jetson Nano via the Micro USB socket or power jack.* Do not use 18650 battery with built-in protection circuit
|-
|}