2,853
edits
Changes
Jump to navigation
Jump to search
T208
,! Header text !! Header text
|-
| Example FOR USE WITH || ExampleJetson Nano
|-
| Example OPERATING SYSTEM || ExampleAll operating systems
|-
| Example KEY FEATURES || Example Smart and powerful Uninterruptible Power Supply (UPS)- Provides continuous operations for up to 10~30hours (depending on battery type and qty used)- Max 5.1V 8000mA Power Backup for even the most demanding Jetson Nano set ups- 6-cell 18650 lithium Ion holder- Can work with 1/2/3/4/5/6 18650 lithium Ion batteries- Supports 3A fast battery charging- Integrated battery protection circuit- Integrated over current protection and over voltage protection- Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c)- Integrated TI's 10-A fully-integrated synchronous boost converter- Intelligent automatic charging and discharging- On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%- On-board blue LED show the status of power on/off Intelligent and safe power management- On-board push button to control power on /off (Press-ON, Hold the button pressed at least 3s -OFF)- AC power loss or power adapter failure detection (LED and GPIO indication)- Automatic powering off after system shutdown using the GUI- Optional to enable Auto power on when power applied or restored- Ultra-low standby power consumption of μA to maximize battery life- Integrated IN-to-SYS pass-through path to pass the input voltage to the system- Operate in both charge mode and boost mode to allow full system management and battery power management- Advanced system power path management avoids frequent charging and extend battery life- Advanced system power path management allows 3A fast charging and powering Jetson Nano at the same time- Powers the Jetson Nano via the 40-pin header - no additional cabling required- Power input jack (5.5*2.5mm) and XH2.54 connector convenient for power input- On-board PH2.0 connector allows to connect external power switch and DIY your perfect case- On-board XH2.54 power output connectors allow to power other devices- Mounting holes and standoffs provide mechanical stability of the Jetson Nano and T208 assembly
|-
| Example || Example