2,841
edits
Changes
Jump to navigation
Jump to search
FOR USE WITH {| class="wikitable"|- Jetson NanoOPERATING SYSTEM ! Header text !! Header text|- All operating systemsKEY FEATURES Smart and powerful Uninterruptible Power Supply (UPS)| Example || Example|- Provides continuous operations for up to 10~30hours (depending on battery type and qty used)- Max 5.1V 8000mA Power Backup for even the most demanding Jetson Nano set ups| Example || Example|- 6-cell 18650 lithium Ion holder- Can work with 1/2/3/4/5/6 18650 lithium Ion batteries| Example || Example|- Supports 3A fast battery charging- Integrated battery protection circuit| Example || Example|- Integrated over current protection and over voltage protection- Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c)| Example || Example- Integrated TI's 10-A fully-integrated synchronous boost converter- Intelligent automatic charging and discharging- On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%- On-board blue LED show the status of power on/off Intelligent and safe power management- On-board push button to control power on /off (Press-ON, Hold the button pressed at least 3s -OFF)- AC power loss or power adapter failure detection (LED and GPIO indication)- Automatic powering off after system shutdown using the GUI- Optional to enable Auto power on when power applied or restored- Ultra-low standby power consumption of μA to maximize battery life- Integrated IN-to-SYS pass-through path to pass the input voltage to the system- Operate in both charge mode and boost mode to allow full system management and battery power management- Advanced system power path management avoids frequent charging and extend battery life- Advanced system power path management allows 3A fast charging and powering Jetson Nano at the same time- Powers the Jetson Nano via the 40-pin header - no additional cabling required- Power input jack (5.5*2.5mm) and XH2.54 connector convenient for power input- On-board PH2.0 connector allows to connect external power switch and DIY your perfect case- On-board XH2.54 power output connectors allow to power other devices- Mounting holes and standoffs provide mechanical stability of the Jetson Nano and T208 assembly SPECIFICATION - Power input : 5Vdc ±5%, ≥4A- UPS output : 5.1V ±5% Max 8A- UPS charging current: 2A via Micro-USB socket, 3A via DC jack- Terminal Battery Voltage : 4.24V - Recharge Threshold : 4.1V NOTES - Do not apply power to your Jetson Nano via the Micro USB socket or power jack.- Do not use 18650 battery with built-in protection circuit|}
T208
,==Features==
==Packing List==