Changes

PiKVM-A4

301 bytes added, 20:03, 21 August 2023

<html>

<summary>Why the device does not show the video only display No Signals?</summary>

<ul><li>Double-check that the video capture device is connected correctly and tightly. For the CSI bridge, this should be exactly the camera port;</li>

<li>Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).</li>

<li>Your computer maybe enter sleep mode, please exit sleep mode</li>

<li>If your desktop only has a VGA display port, there may be no video signal when you use VGA to HDMI adapter, and there is no way to solve this; However, you can try to lower the resolution and restart the PC to test, but the probability of success is very low.</li>

</ul>

</details>

<summary>Q. I want to control several pc power. Is it possible with one PiKVM-A4 and several x630-a5</summary>

</details>

~~<details>~~

~~<summary>Q: Why PiKVM-A3/A4 does not show the video?</summary>~~

~~A:~~

~~~~

~~<li>Double-check that the video capture device is connected correctly and tightly. For the CSI bridge, this should be exactly the camera port;</li>~~

~~<li>Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).</li>~~

~~<li>Your computer may have turned on sleep mode for the monitor. Move the mouse to turn it off.</li>~~

~~</details>~~

Harry

Bureaucrats, Comment administrators, Interface administrators, Administrators

5,154

edits