5,154
edits
Changes
** 2 x M2.5x15mm F/F Spacers
* '''1 x X630-A4 V2.0 Expansion Board'''
** 1 x USB-A to '''Micro USB-C ''' OTG Cable (Cable Length: 100cm / 39.37 inch)
** 2 x M2.5x4+4mm Spacers
** 2 x M2.5x17mm F/F Spacers
===Hardware Installation===
'''For X630-A4 V2.0:'''
[[File:KVM-A4-V2.0-how-to-connect.jpg|700px|KVM-A4 V2.0 Real]]
'''For X630-A4 V1.1:'''
[[File:PiKVM-A4-real.jpg|700px|RPIKVM-A4]]
'''For X630-A4 V2.0:'''
[[File:PiKVM-A4-V2-Connection.jpg|700px|KVM-A4 V2.0]]
'''For X630-A4 V1.1:'''
[[File:PiKVM-A3A4-Connection.jpg|700px|PIKVM-A3 PiKVM-A4]]
(<span class="tb_red">Please be sure to provide installation pictures or videos to contact us, which can effectively solve the problem.Thanks.</span>)
6. [https://geekworm.com/community/forum/topic/85024/enable-oled-on-geekworm-pikvm-a4-kit Enable oled on Geekworm PiKVM-A4 Kit]
==FAQ==
* Blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz
<htmlhtmL>
<details>
<summary>Q. Why the device does not show the video only display <b><span class="tb_red">No Signals</span></b>?</summary><ul><li>Please check the hardware connection. Double-check that the video capture device is connected correctly and tightly. For the CSI bridge, this should be exactly the camera port;</li><li>Make sure you use the <span class="tb_red">original HDMI</span> port. If your desktop only has a VGA display port, there may be no video signal when you use VGA to HDMI adapter, and there is no way to solve this; However, you can try to lower the resolution and restart the PC to test, but the probability of success is very low.</li><li>Change the HDMI cable to test.</li><li>Test the X630 separately to check if there is HDMI output.</li>
<li>Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).</li>
<li>Your computer maybe enter sleep mode, please exit sleep mode</li>
</ul>
</details>