P394

From Geekworm Wiki
Revision as of 18:12, 2 November 2023 by Abby (talk | contribs) (→‎Features)
Jump to navigation Jump to search

Overview

This is a acrylic case for the latest Raspberry Pi 5 8GB / 4GB, model P394. 9-layer acrylic structure which is lightweight and durable. It support install official Raspberry Pi 5 active cooler, 30x30mm fan, 40x40mm fan for heat dissipation.

Features

  • Model: P394
  • Material: Acrylic
  • Easy access to all ports of Raspberry Pi 5
  • Compatible with Raspberry Pi 5 Official active cooler
  • Size: 92*67*25mm / 3.62 * 2.64 * 0.98
  • Weight: 68g

Packing List

  • 1 x Acrylic case,
  • 4 x screws,
  • 4 x nuts,
  • 4 x rubber feet

Note: NOT include Raspberry Pi 5 motherboard or Raspberry Pi active cooler.

User Manual

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #5

3 months ago
Score 0++
Total crap. The 2nd layer is supposed to be sized to let the Raspberry Pi 5 board to fix inside it. It’s too narrow. I would have to file it larger in order to use this.

Walker

3 months ago
Score 0++
Hi, I'm sorry for the inconvenience, the Raspberry Pi 5 motherboard is just the right size to fit in, there shouldn't be any problems, can you provide us with some pictures?

Anonymous user #4

4 months ago
Score 0++
It all feels compressed when mounted. The power buttonhole was not present. Had the original cooler installed before mounting, which went fine. The design has to be revised as it is not a decent fit for the Pi5.

Walker

4 months ago
Score 0++
Hi, we have now changed the design and added a key button

Anonymous user #3

4 months ago
Score 0++

This thing makes no sense at all. I need a case to protect the device and I don't want to disassemble essential parts (active cooler) every time I change something. Also, the Pi does not have a reasonable hold in the case - it is only held in place by pressure.

Totally useless and pointless.

Walker

4 months ago
Score 0++

Hi, the design principle of this acrylic case is like this, using 9 layers of acrylic stacked on top of each other, if you don't like this kind of design, you can consider our Pi 5 metal case:

P573

Anonymous user #2

5 months ago
Score 0++
This case CAN be used if you have already installed a PI Active cooler on your PI 5. HOWEVER, you are going to need to take the active cooler off. You'll need to use pliers to pinch the fasteners while pulling on them slightly. There is little issue with doing this. Be careful not to damage your thermal pads when removing, placing the spacer, or adding them back.

Walker

5 months ago
Score 0++
Yes ,You're absolutely right.

Anonymous user #1

5 months ago
Score 0++
This case can NOT be used if you're already installed a Pi Active cooler on your Pi 5.

Walker

5 months ago
Score 0++
Hello, this acrylic case is compatible with the Raspberry Pi 5 active cooler, it is possible to install it in, you can refer to the installation guide