2,870
edits
Changes
* For the heat dissipation system, we chose a relatively simple and practical heat dissipation solution: a custom metal bracket and a 4010 2pin cooling fan to achieve it.
<span style==Power supply==Power supply"color:red;">'''Note: 5Vdc +/-5% , ≥3A (Via Type-C Port of ''' The X-C2)adapter must be connected with load to operate the normal power on/off.</span>
==Features==
* <span style="color:red;">Press button switch and hold for 3 seconds to force shutdown</span>
* <span style="color:red;">DO NOT</span> support software shutdown
* <span style="color:red;">DO NOT</span> support auto power on function
==How to Power==
* Power NASPi-Lite via USB-C socket of X-C2 adapter
* Power supply requirement: 5Vdc +/-5% , ≥4A
We recommend that you use our 20W 5V 4A Type-C power adapter [[USB C PSU]].
Amazon US: https://www.amazon.com/dp/B09J856PND
Amazon DE: https://www.amazon.de/dp/B09J4V3RYK
==Packing List==
* 1 x NASPi Lite alu case
* 1 X X823 V1.5 Shield
* 1 x X-C2 V1.0 adapter board
* 1 x X823-A3 metal bracket with 2Pin cooling fan
* Scews pack accessories;
==Document==
===Difference between Geekworm NAS Family===
Pls refer to [[GEEKWORM NAS Family]]
===Some tutorials===
*[[How to View/Partition/Format/Mount HDD/SSD]]
*[https://raspberrytips.com/format-mount-usb-drive/ How to Format and Mount a USB drive on Raspberry Pi]
* How to Run Raspberry Pi 4 or 3 Off an SSD or Flash Drive: [[Does the X825/X855 support USB boot]]
* Tutorial – How to Initialize, Partition and Format a Brand New SSD in Windows: [[File:Tutorial_Initalize_New_SSD.pdf]]
* [https://www.addictivetips.com/ubuntu-linux-tips/set-up-openmediavault-on-raspberry-pi-4/ How to set up OpenMediaVault on Raspberry Pi 4]
*[[Properly Mount USB Storage on Raspberry Pi]]
*[[Auto Mount an NTFS USB Drive on Raspberry Pi]]
* [https://github.com/raspberrypi/firmware/issues/1515 Difficulty booting from SSD drive]
===Installation Video===
For NASPi-Lite Kit with X823 V1.5(RPi4+X823 V1.5+X-C2 V1.0):
https://youtu.be/WRs7P7rLVJM
{{#ev:youtube|https://youtu.be/WRs7P7rLVJM}}
5G AP WIFI Test:
https://youtu.be/LKJVIBQFYXs
{{#ev:youtube|https://youtu.be/LKJVIBQFYXs}}
==FAQ==
A： If you have a Raspberry Pi 4 and are getting bad speeds transferring data to/from USB3.0 SSDs, read this https://www.raspberrypi.org/forums/viewtopic.php?t=245931
A: As our test, 2.4G WIFI AP was usable. But different Raspberry Pi individuals have different degrees of WIFI interference. As well as aluminum alloy case will interfere with pi 4’s WIFI to a certain extent. So it is strongly recommend to use Ethernet or 5G AP. You can refer to video test of 5G WIFI AP: https://youtu.be/LKJVIBQFYXs
A: The thickness of 2.5" HDD/SSD on the market is generally 7mm, 9.5mm, 12.5 and 15mm，You only can choose <span style="color:red;">7mm or 9.5mm</span> thickness HDD/SSD, NASPi Lite is not compatible with 12.5mm and 15mm thickness 2.5" HDD/SSD.The thickness of 2.5" HDD/SSD should not exceed 9.8mm. In fact, most 2.5" HDD/SSD on the market are only 7mm thick.
A: Please refer to: [[Raspberry pi 4 can't find 5ghz wifi]]
A:The read and write performance is determined by the speed of the Raspberry Pi’s USB 3 bus and SSD. It should be noted that the Raspberry Pi’s USB3 bandwidth is only 3Gbps. Normally, the R/W speed is about 300MB/S.
A: According to the customer feedback(based on 2021-05-07-raspios-buster-arm64-lite), the NASPi is OK to use with PoE splitter, but make sure to use high quality PoE splitter, or the power maybe not enough to power the NASPi kit.
==Collect Feedback==