[[File:Naspi-IMG-0258.jpg|thumb|right|naspi rear view]]
[[File:IMG-0250-struct1.jpg|thumb|right|naspi layering diagram]]
[[File:AdjustIMG-fan3781-fan1.pngjpg|thumb|right|How to adjust the fan speed of NASPinaspi V2.0 Internal view]][[File:Naspi-IMG-0253.jpg|thumb|right|naspi Internal view 1]][[File:X823_V1V1.3-IMG-0111.jpg|thumb|right|naspi Internal view 2]]
[[File:X823-A3-IMG-0272.jpg|thumb|right|X823-A3 metal bracket and PWM fan]]
[[File:X823_V1.3-IMG-0121.jpg|thumb|right|X823 sata storage shieldV1.3 SATA Storage Shield]][[File:X823-V1.5-01.jpg|thumb|right|X823 V1.5 SATA Storage Shield]][[File:IMG_3713-compare-NEW.jpg|thumb|right|X-C1 v2.0 Adapter Board]][[File:X-C1-IMGAdapter-0130Board-size1.jpg|thumb|right|X-C1 adapter shieldv1.3 Adapter Board]][[File:NASPi-Packing-List.jpg|thumb|right|NASPi V2.0 Packing List]]
==OverviewForeword==NASPI Click [[GEEKWORM NAS Family]] to know more.===Update History==='''On April 28th 2022, NASPi is a NUCupdated to NASPi V2.0(New add Auto Power On function, and only the X-C1 adapter shield was upgraded from V1.3 to V2.0 version)''' <span style NAS storage solution based ="color:red;>Note: Due to the different arrival times of products on each platform, please refer to the platform information for the latest Raspberry Pi 4purchased version. It supports 2.5-inch sata HDD</SSD. All span> * Add '''Auto Power On''' Function (Automatically turn on when there is a power supply)* Add '''FAN FS''' jumper to control the Raspberry Pi 4 interfaces PWM fan; Because we found that there are adjusted some beginners who don't know how to install the script to make the back through PWM fan run, or the X-C1 adapter boardinstallation script doesn't support 3rd party OS, at this time, build in software safety shutdown functionyou just need to remove the '''FAN FS''' jumper, using the PWM fan can dynamically adjust will run at full speed.* Remove the speed of 4-Pin connector for external power switch '''On August 17th 2021, the fan according X823 board in NASPi has been updated from V1.3 to the temperature of the CPUV1.5 version.''' X823 V1.5 added 4pcs test pins so that RPi 4 and X823 V1.5 power each other via test pins, so '''2pin power wire is no longer needed''' in '''X823 1.5''', (But if you get X823 V1.3 version, the shell you still need to connnect 2pin power cable from X-C1 to X823 V1.3， and X813 V1.3 is made of all aluminum alloysold out.) '''On 28th July 2021, CNC processing methodWe added one backup acrylic front panel to help improve WiFi signal.''' But acrylic material is fragile, surface anodizing treatmentbe careful for the installation. According to our test 2.4G WIFI is usable. But 5GHz WIFI networks will be more stable. So strongly recommend to use 5GHz WIFI networks or Ethernet. Refer to [https://www.youtube.com/watch?v=LKJVIBQFYXs 5G WIFI test video]; The wireless keyboard we tested usable is logitech K520.
NASPI adopts modular design, and NASPI is composed of three parts: X823 storage shield, X===Difference between NASPi & NASPi-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case to get a complete NASPi;Lite===
On Oct., 18th 2021, we released [[File:IMG-0403-640X320.jpg|centerNASPi Lite]], which is a simplified version of NASPi.
* X823 provides 2.5 inch HDD/SSD storage function(UASP supported); * X-C1 provides power management, interface adapter and safe shutdown function * For the heat dissipation systemOn March 30th, we chose also launched a relatively simple and practical heat dissipation larger storage solution: a custom metal bracket and a PWM fan to achieve it. in fact, you can use [[P165 | P165-BNASPi Gemini 2.5]] to get , which supports dual 2.5" sata hdd/ssd working at the same function, but maybe [[P165 | P165-B]] will have a slight impact on WIFItime.
[https<span style="color://geekworm.com/blogs/news/naspis-story NASPired;">What's Storythe difference between [[NASPi]] and [[NASPi Lite]]?</span>
==Power supply==[[File:NASPi-NASPi-Lite-Compare.jpg|700px|NASPi & NASPi-Lite Compare]]Power supply[[File: 5Vdc +/NASPi-V2-VS-5% , ≥3A (Via TypeNASPi-C Port of XLite.jpg|700px|NASPi V2.0 & NASPi-C1)Lite Compare]]
We recommend that you use raspberry pi official type c power adapter: https://www==Overview==NASPi is a NUC-style NAS storage solution based on the latest Raspberry Pi 4.raspberrypiIt supports 2.org5-inch sata HDD/products/typeSSD. All the Raspberry Pi 4 interfaces are adjusted to the back through the X-c-power-supply/C1 adapter board, build in software safety shutdown function, using PWM fan can dynamically adjust the speed of the fan according to the temperature of the CPU, the shell is made of all aluminum alloy, CNC processing method, surface anodizing treatment.
Amazon USNASPi adopts modular design, and NASPi is composed of three parts: httpsX823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case to get a complete NASPi;* X823 provides 2.5 inch HDD/SSD storage function(UASP supported); * X-C1 provides power management, interface adapter and safe shutdown function， new add '''Auto Power On''' and '''Fan Control''' in Version 2.0.* For the heat dissipation system, we chose a relatively simple and practical heat dissipation solution://wwwa custom metal bracket and a PWM fan to achieve it.amazonin fact, you can use [[P165 | P165-B]] passive cooling heatsink to get same function, but maybe [[P165 | P165-B]] will have a slight impact on WIFI.com/dp/B07W8XHMJZ
==User Manual==Please refer to [[Xhttps://geekworm.com/blogs/news/naspis-C1 Software]story NASPi's Story]
Please install the script firstly if you want to safe shutdown.
==Features==
* NUC style set-top box, compact design
* All aluminum alloy chassis
* <span style="color:red;">UASP supported only for Raspberry Pi 4, does not support TRIM</span>* Support software safe shutdown (this function is from X-C1shield)
* With PWM Silent fan, The fan speed will be automatically adjusted according to the CPU temperature, you can also modify the script yourself
* On-board blue light button switch on X-C1, and X-C1 supports external 4-pin switch also
* <span style="color:red;">Press button switch and hold for 3 seconds to implement safe shutdown</span>
* <span style="color:red;">Press button switch and hold for more than 8 seconds to force shutdown</span>
* Support auto power on function for NASPi V2.0 Only(NASPi with X-C1 V1.3 adapter does not support auto power on)
* Support Max. 9.8mm thickness 2.5" HDD/SSD, you can choose 7mm or 9.5mm thickness HDD/SSD.
==FAQ=X-C1 V1.3&V2.0 Shield GPIO Used==={| class="wikitable"! Rpi GPIO !! Description !! Note|-| 4 || Power management || 3.3V|-| 17 || Power management || 3.3V|-| 27 || Power management || 3.3VQ1|-| 18 || for PWM fan || 3.3V|}[[File:X-C1-V1.3-GPIO. Will the Alu case affect the WIFI?png]]
A==How to Power==Power supply: As our test5Vdc +/-5% , 2.4G WIFI AP was usable. But different Raspberry Pi individuals have different degrees of WIFI interference. As well as aluminum alloy case will interfere with pi 4’s WIFI to a certain extent. So it is strongly recommend to use Ethernet or 5G AP. You can refer to video test ≥4A (Via Type-C Port of 5G WIFI AP: https://youtu.be/LKJVIBQFYXsX-C1)
We recommend that you use our 20W 5V 4A Type-C power adapter [[USB C PSU]], and we also sell it in our Geekworm Amazon store
Q2: <span styleclass="color:red;tb_red ">What is the thickness of a 2.5" HDD/SSD that can be accommodated?Warning about power supply:</span># Don't use that adjustable voltage power supply.# Don't use the same power supply used on LED strips.These power supplies are of poor quality and are not suitable for the NASPi series
A: The thickness of 2==User Manual=====Installation Video===For NASPi Kit with X823 V1.5" HDD/SSD on the market is generally 7mm, 9.5mm, 12(RPi4+X823 V1.5 and 15mm，You only can choose <span style="color:red;">7mm or 9+X-C1 V1.5mm</span> thickness HDD3/SSD, NASPi is not compatible with 12V2.5mm and 15mm thickness 2.5" HDD0):https:/SSD.The thickness of 2.5" HDD/SSD should not exceed 9youtu.8mm. In fact, most 2.5" HDDbe/SSD on the market are only 7mm thick.ithz2Mg5Vrc
{{#ev:youtube|https://youtu.be/ithz2Mg5Vrc}}
Q3: ===How to make Install Script===Refer to [[X-C1 Software | how to install the shell script]], and this script is required to install to enable PWM cooling fan running?runs and safe shutdown function.
A===Some tutorials===*[[How to View/Partition/Format/Mount HDD/SSD]]*[https: You will need //raspberrytips.com/format-mount-usb-drive/ How to Format and Mount a USB drive on Raspberry Pi]* How to migrate Raspberry Pi SD card to install a USB SSD: https://www.youtube.com/watch?v=AenM-JrG098* How to Run Raspberry Pi 4 or 3 Off an SSD or Flash Drive: [[Does the shell script X825/X855 support USB boot]]* Tutorial – How to make the cooling fan runInitialize, please refer toPartition and Format a Brand New SSD in Windows: [[File:Tutorial_Initalize_New_SSD.pdf]]* [https://wikiwww.geekwormaddictivetips.com/Xubuntu-linux-tips/set-up-openmediavault-on-raspberry-pi-C1_Software4/ How to set up OpenMediaVault on Raspberry Pi 4]
We can manually run the following commandsSome Tips*[[Properly Mount USB Storage on Raspberry Pi]]*[[Auto Mount an NTFS USB Drive on Raspberry Pi]]* [https: sudo python /home/pigithub.com/raspberrypi/firmware/x-c1issues/x-c1_pwm_fan_control.py&1515 Difficulty booting from SSD drive]Then the pwm fan will start working* How to build a Raspberry Pi NAS: https://youtu.be/gyMpI8csWis
Q4===5G AP WIFI Test==={{#ev: <span style="coloryoutube|https:red;">How to find and use the Raspberry Pi 4 5G wifi?</span>/youtu.be/LKJVIBQFYXs}}
A: Please === Stress test===This is stree test tool, you can refer to: [[Raspberry pi 4 can't find 5ghz wifiNaspi stress test]]. You can run this tool to check the thermal capability of NASPi
===Other video===
<!--
Thanks for the Video from ETA Prime.
-->
{{#ev:youtube|https://youtu.be/D0-QMDYUBVk}}
Q5{{#ev: How to adjust the fan speed to get better heat dissipation? A: modify the x-c1_pwm_fan_control.py file as following. [[Fileyoutube|https:Adjust-fan-fan//youtu.png|none|How to adjust the fan speed|700px]]be/vwg4oLCBA_w}}
==Packing List==
* 1 X X823 Shield
* 1 x X-C1 adapter board
* 1 x X823-A3 metal bracket* 1 x with PWM fan
* Scews pack accessories;
==Installation VideoFAQ==<html> <details><summary>Q: How to disable the LED light of the Button switch?</summary><br><div class="floatnone"><a href="/File:X-C1.jpg" class="image" title="How to disable the LED light of the Button switch"><img alt="How to disable the LED light of the Button switch" src="/images/thumb/c/ce/X-C1.jpg/700px-X-C1.jpg" decoding="async" width="700" height="632" srcset="/images/c/ce/X-C1.jpg 1.5x" data-file-width="918" data-file-height="829"></a></div></details> <details><summary>Q. Why the SSD cannot start or is very slow?</summary>A： If you have a Raspberry Pi 4 and are getting bad speeds transferring data to/from USB3.0 SSDs, read this<a target="_blank" rel="nofollow noreferrer noopener" class="external free" href="https://www.raspberrypi.org/forums/viewtopic.php?t=245931">https://www.raspberrypi.org/forums/viewtopic.php?t=245931</a></details>
<details><summary>Q. Will the Alu case affect the WIFI?</summary>A. There is nothing reliable than wired Ethernet, so it's better to use it.<br>As our test, 2.4G WIFI AP was usable. But different Raspberry Pi individuals have different degrees of WIFI interference. As well as aluminum alloy case will interfere with pi 4’s WIFI to a certain extent. So it is strongly recommend to use Ethernet or 5G AP. You can refer to video test of 5G WIFI AP:<a target="_blank" rel="nofollow noreferrer noopener" class="external free" href="https://youtu.be/LKJVIBQFYXs">https://youtu.be/RQGYf6Fqf6sLKJVIBQFYXs</a></details>
{{#ev<details><summary><span style="color:youtube|httpsred">Q. What is the thickness of a 2.5" HDD/SSD that can be accommodated?</span></summary>A. The thickness of 2.5" HDD/SSD on the market is generally 7mm, 9.5mm, 12.5 and 15mm，You only can choose <span style="color:red;">7mm or 9.5mm</span> thickness HDD/youtuSSD, NASPi is not compatible with 12.be5mm and 15mm thickness 2.5" HDD/SSD.The thickness of 2.5" HDD/SSD should not exceed 9.8mm. In fact, most 2.5" HDD/SSD on the market are only 7mm thick.</RQGYf6Fqf6s}}details>
5G AP WIFI Test
{{#ev<details><summary>Q. How to make the PWM cooling fan running?</summary>A. You will need to install the shell script to make the cooling fan run, please refer to: <a href="/X-C1_Software" title="X-C1 Software">X-C1_Software</a><br>We can manually run the following commands:<pre>sudo python /home/pi/x-c1/fan-rpi.py &</pre>or<br><pre>sudo python3 /home/pi/x-c1/fan-rpi.py &</pre>Then the pwm fan will start working.</details> <details><summary>Q. <span style="color:red">How to find and use the Raspberry Pi 4 5G wifi?</span></summary>A. Please refer to:<a href="/Raspberry_pi_4_can%27t_find_5ghz_wifi" title="Raspberry pi 4 can't find 5ghz wifi">Raspberry pi 4 can't find 5ghz wifi</a></details> <details><summary>Q. Does the PWM cooling fan running or not?</summary>A. 1. The fan is very silent, and it is not easy to hear the sound of the fan;<br>2. The fan is a PWM fan which dynamically adjusts the speed according to the temperature of the CPU. If the temperature of the CPU is low, the speed of the fan is extremely low, and it is not easy to hear the sound of the fan;<br>3. Only when the CPU temperature reaches 65 degrees or more, the fan will run at full speed, and you may be able to hear the sound of the fan;<br>4. The fan is controlled by the PWM signal. The fan will only run after the ‘python /home/pi/x-c1/fan.py&’ command runs successfully; you can run the following command to check whether the fan is running; sudo jobs</details> <details><summary>Q. What is the read/write performance when used as a NAS?</summary>A. The read and write performance is determined by the speed of the Raspberry Pi’s USB 3 bus and SSD. It should be noted that the Raspberry Pi’s USB3 bandwidth is only 3Gbps. Normally, the R/W speed is about 300MB/S.</details> <details><summary>Q. Does the NASPi support PoE?</summary>A. According to the customer feedback(based on 2021-05-07-raspios-buster-arm64-lite), the NASPi is OK to use with PoE splitter, but make sure to use high quality PoE splitter, or the power maybe not enough to power the NASPi kit.</details> <details><summary>Q. Can the PWM fan in NASPi be replaced by other fan like noctua 5v 40mm 3-pin pwm fan?</summary>A. Please refer to the below photo of the fan port interface definition of X-C1 adapter:<br>red cable = 5V<br>black cable = GND<br>yellow cable = for PWM signal<p><a href="/File:X-C1-fan-Port.png" class="image" title="X-C1 Fan"><img alt="X-C1 Fan" src="/images/thumb/4/48/X-C1-fan-Port.png/500px-X-C1-fan-Port.png" decoding="async" width="500" height="309" srcset="/images/thumb/4/48/X-C1-fan-Port.png/750px-X-C1-fan-Port.png 1.5x, /images/thumb/4/48/X-C1-fan-Port.png/1000px-X-C1-fan-Port.png 2x" data-file-width="1233" data-file-height="763"></a></p></details> <details><summary>Q. Does the NASPi support SATA III?</summary>A. Yes, it support SATA III, also support SATA I, SATA II.</details> <details><summary>Q. What to do if HDD/SSD is not recognized?</summary>A. Please refer to<a href="/How_to_View/Partition/Format/Mount_HDD/SSD" title="How to View/Partition/Format/Mount HDD/SSD">How to View/Partition/Format/Mount HDD/SSD</a></details> <details><summary>Q. Does the NASPi support add RTC module?</summary>A. Sorry, no, the NASPi does not support add RTC module.</details> <details><summary>Q. How to enable fan temperature control?</summary>A. This setting is based on the latest Raspberry Pi OS ONLY. Run the command: sudo raspi-config and navigate to Performance Options to set the Fan Temperature. The fan speed is not adjustable.<div class="floatnone"><a href="/File:youtube|PWM-Fan-01.jpg" class="image" title="PWM Fan"><img alt="PWM Fan" src="/images/thumb/f/f0/PWM-Fan-01.jpg/500px-PWM-Fan-01.jpg" decoding="async" width="500" height="389" srcset="/images/thumb/f/f0/PWM-Fan-01.jpg/750px-PWM-Fan-01.jpg 1.5x, /images/thumb/f/f0/PWM-Fan-01.jpg/1000px-PWM-Fan-01.jpg 2x" data-file-width="2839" data-file-height="2207"></a></div></details> <details><summary>Q. What SSD is not supported?</summary>A. 4TB SAMSUNG SSD is not supported according to the customer feedback. The NASPi can support 4TB HDD.</details> </html> ==Collect Feedback== https://youtugeekworm.becom/community/forum/topic/33043/LKJVIBQFYXs}}solicit-naspi-user-experience-feedback-solutions
<!--Add review function! -->