Difference between revisions of "N500"
Jump to navigation
Jump to search
Line 17: | Line 17: | ||
* High quality metal material with surface galvanized process; | * High quality metal material with surface galvanized process; | ||
* All ports and slots of the case can match with orange pi zero 2 board perfectly | * All ports and slots of the case can match with orange pi zero 2 board perfectly | ||
− | * Good heat dissipation, | + | * Good heat dissipation, can use 3010 5V active cooling fan and 4pcs Passive aluminum alloy heatsink at the same time. |
* Good wifi signal, reserves many round cooling holes on the side of the case, almost no weakeness for the WIFI signal; | * Good wifi signal, reserves many round cooling holes on the side of the case, almost no weakeness for the WIFI signal; | ||
* Reserved GPIO cable hole | * Reserved GPIO cable hole | ||
− | * 2 antenna holes are reserved to facilitate the installation of external antennas | + | * 2 antenna holes are reserved to facilitate the installation of external antennas and buildin antenna |
* Case Dimensions: 70 x 57 x 35mm/2.75 x 2.44 x 1.37inch | * Case Dimensions: 70 x 57 x 35mm/2.75 x 2.44 x 1.37inch | ||
− | * with | + | * with mounting hole (50mm distance), you can hang it on the wall or somewhere you want. |
==Packing List== | ==Packing List== |
Revision as of 15:10, 28 April 2022
Contents
Overview
This is a metal case specially designed for Orange Pi Zero 2, we name it as N500. It reserves all the interfaces of the orange pi zero 2 motherboard, supports the 3010 cooling fan, supports the extraction of the GPIO cable, and also reserves 2 antenna holes for you to replace the antenna that comes with the motherboard.
Note: Only compatible with Orange Pi Zero 2, NOT compatible with Orange Pi Zero!!!!
Features
- High quality metal material with surface galvanized process;
- All ports and slots of the case can match with orange pi zero 2 board perfectly
- Good heat dissipation, can use 3010 5V active cooling fan and 4pcs Passive aluminum alloy heatsink at the same time.
- Good wifi signal, reserves many round cooling holes on the side of the case, almost no weakeness for the WIFI signal;
- Reserved GPIO cable hole
- 2 antenna holes are reserved to facilitate the installation of external antennas and buildin antenna
- Case Dimensions: 70 x 57 x 35mm/2.75 x 2.44 x 1.37inch
- with mounting hole (50mm distance), you can hang it on the wall or somewhere you want.
Packing List
- 1 x N500 Metal Case
- 1 x 3010 Cooling Fan
- 1 x 4pcs Aluminum Heatsinks(silver)
- 4 x KM3*14 screws(for Fan)
- 4 x M2.5 Copper Buts
- 4 x M2.5x5+5mm spacers
- 4 x KM2.5x4mm screws
- 1 x 4pcs Rubber Pads(black)
Enable comment auto-refresher