Changes

Jump to navigation Jump to search

X1100 Hardware

954 bytes added, 00:23, 8 December 2023
no edit summary
{{GD Template Impl}}
[[File:02-X1100-V1.0-hardware.jpg|800px]]

'''[Required hardware]'''
# X1100 USB3.0 to SATA HDD/SSD shield
# Raspberry Pi 5 Model B
# 16GB micro-SD card x1 (Optional)
# 27W USB-C Power Supply

'''[Hardware installation]'''

1. Insert the SSD into the SATA socket. Make sure it’s lined up with the corresponding holes underneath before screwing it into position

[[File:X1100v1.0-install1.jpg]]

2. Push four M2.5 screws down through themounting hole and screw four spacers(M2.5x14mm) down until it is hand tight.

[[File:X1100v1.0-install2.jpg]]

3. Four M2.5 screws to screwdown the Raspberry Pi 5

[[File:X1100v1.0-install3.jpg]]

4. Insert the USB jumper into the USB connector

[[File:X1100v1.0-install4.jpg]]


Return to [[X1100]]

<!--Add review function! -->
<comments />

<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]

Navigation menu