5,653
edits
Changes
Jump to navigation
Jump to search
no edit summary
{{GD Template Impl}}
[[File:02-X1100-V1.0-hardware.jpg|800px]]
'''[Required hardware]'''
# X1100 USB3.0 to SATA HDD/SSD shield
# Raspberry Pi 5 Model B
# 16GB micro-SD card x1 (Optional)
# 27W USB-C Power Supply
'''[Hardware installation]'''
1. Insert the SSD into the SATA socket. Make sure it’s lined up with the corresponding holes underneath before screwing it into position
[[File:X1100v1.0-install1.jpg]]
2. Push four M2.5 screws down through themounting hole and screw four spacers(M2.5x14mm) down until it is hand tight.
[[File:X1100v1.0-install2.jpg]]
3. Four M2.5 screws to screwdown the Raspberry Pi 5
[[File:X1100v1.0-install3.jpg]]
4. Insert the USB jumper into the USB connector
[[File:X1100v1.0-install4.jpg]]
Return to [[X1100]]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[File:02-X1100-V1.0-hardware.jpg|800px]]
'''[Required hardware]'''
# X1100 USB3.0 to SATA HDD/SSD shield
# Raspberry Pi 5 Model B
# 16GB micro-SD card x1 (Optional)
# 27W USB-C Power Supply
'''[Hardware installation]'''
1. Insert the SSD into the SATA socket. Make sure it’s lined up with the corresponding holes underneath before screwing it into position
[[File:X1100v1.0-install1.jpg]]
2. Push four M2.5 screws down through themounting hole and screw four spacers(M2.5x14mm) down until it is hand tight.
[[File:X1100v1.0-install2.jpg]]
3. Four M2.5 screws to screwdown the Raspberry Pi 5
[[File:X1100v1.0-install3.jpg]]
4. Insert the USB jumper into the USB connector
[[File:X1100v1.0-install4.jpg]]
Return to [[X1100]]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]