P394

P394-A

P394-B

P394-A

P394-A

P394-A

Overview

This is a acrylic case for Raspberry Pi 5 8GB / 4GB. It also compatible with Raspberry Pi 5 active cooler to provide good heat dissipation.If you don't want to use the Raspberry Pi 5 official Active Cooler, you can also install 3010 or 4010 fan on the top layer.

9-Layers acrylic structure holds your Pi board firmly in place, and don't worry about WLAN. This Raspberry Pi 5 case is made of acrylic, which provides a clear glossy finish and easy to check the working status of Raspberry Pi.

Features

• Model: P394
• Material: Acrylic
• Easy access to all ports of Raspberry Pi 5
• Compatible with Raspberry Pi 5 Official active cooler
• Size: 92*67*25mm / 3.62 * 2.64 * 0.98
• Weight: 68g

Packing List

• 1 x Acrylic case,
• 4 x screws,
• 4 x nuts,

Note: NOT include Raspberry Pi 5 motherboard or Raspberry Pi active cooler.

User Manual

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

9 months ago

Score 0

Total crap. The 2nd layer is supposed to be sized to let the Raspberry Pi 5 board to fix inside it. It’s too narrow. I would have to file it larger in order to use this.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

9 months ago

Score 0

Hi, I'm sorry for the inconvenience, the Raspberry Pi 5 motherboard is just the right size to fit in, there shouldn't be any problems, can you provide us with some pictures?

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

11 months ago

Score 0

It all feels compressed when mounted. The power buttonhole was not present. Had the original cooler installed before mounting, which went fine. The design has to be revised as it is not a decent fit for the Pi5.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

11 months ago

Score 0

Hi, we have now changed the design and added a key button

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

11 months ago

Score 0

This thing makes no sense at all. I need a case to protect the device and I don't want to disassemble essential parts (active cooler) every time I change something. Also, the Pi does not have a reasonable hold in the case - it is only held in place by pressure.

Totally useless and pointless.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

11 months ago

Score 0

Hi, the design principle of this acrylic case is like this, using 9 layers of acrylic stacked on top of each other, if you don't like this kind of design, you can consider our Pi 5 metal case:

P573

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

11 months ago

Score 0

This case CAN be used if you have already installed a PI Active cooler on your PI 5. HOWEVER, you are going to need to take the active cooler off. You'll need to use pliers to pinch the fasteners while pulling on them slightly. There is little issue with doing this. Be careful not to damage your thermal pads when removing, placing the spacer, or adding them back.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

11 months ago

Score 0

Yes ,You're absolutely right.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

11 months ago

Score 0

This case can NOT be used if you're already installed a Pi Active cooler on your Pi 5.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

11 months ago

Score 0

Hello, this acrylic case is compatible with the Raspberry Pi 5 active cooler, it is possible to install it in, you can refer to the installation guide

Permalink