Installation Guide For X850 V3.0 New Version

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

66 months ago

Score 0

BTW, I used the following 120G SSD and it worked very well:

(Amazon) Dogfish Msata 120GB Internal Solid State Drive Mini Sata SSD Disk: https://www....F8&psc=1

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

66 months ago

Score 0

I would have expected that the manual would contain software instructions on how to format/configure the drive (mine originally showed up as /dev/sdb. I figured it out by Googling until I found this: https://thep...minal-window and https://gist...c80579872e5f

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

66 months ago

Score 0

I mounted mine this way but the WiFi was interfered with to the point I could not connect reliably. Way too much IF.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

66 months ago

Score 0

Hi,

Please bed close to the router if this happens, also which SSD do you use?

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

51 months ago

Score 0

I also had too much interference with wifi. Extending the unit away from the Pi with the cable helped but then I found a Crucial M500 at a thrift shop, got another interface cable, set it up for SSD boot on RPi3B+ and have not gotten around to putting this msata shield on another pi yet. Will use if for storage only. Dumb touch to have a USB 3.0 marketed for Raspberry Pi's that don't have usb 3.0 and it is not compatible with the RPi 4B.

Permalink