Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 20:12, 26 May 2026 Harry talk contribs (moderator) edited comment X1001
• 20:12, 26 May 2026 Harry talk contribs (moderator) edited reply X1001
• 20:11, 26 May 2026 Harry talk contribs (moderator) edited comment X1001
• 19:56, 28 April 2026 90.116.144.206 talk performed unknown action "comments/add" on X1001 (I came back here because things have to be clear, the hat IS working !! In fact it was my raspberry pi 5 which was falty ! I tried with a new one and everything is now working. Sorry for incriminating your hat !)
• 17:38, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1001 (Hi, ①The ACT LED lights up solid when the X1001 is powered on, indicating normal power/standby status. ②It flashes when the SSD is reading or writing data. ③There used to be a dedicated PCIe LED that stayed on when the SSD was detected. However, it was removed to comply with the official PCIe specification from the Raspberry Pi Foundation.)
• 17:22, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1001 (Hope this information helps.)
• 17:21, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1001 (First, we don't recommend using high-end controllers on PCIe Gen 2.0 platforms. On one hand, it results in performance overkill; on the other, a few controllers are not backward compatible with PCIe Gen 2, which can easily cause instability and compatibility problems. Second, an unrecognized SSD does not always mean a compatibility issue—other factors may be at play. You can try these troubleshooting steps: :①The FFC cable only provides a maximum of 5W power, which is insufficient for SSDs...)
• 13:08, 4 April 2026 87.179.68.39 talk performed unknown action "comments/add" on X1001 (The ACT LED isn't lit for me; does it light up even without an SSD? Or only when it detects the SSD?)
• 13:08, 4 April 2026 87.179.68.39 talk performed unknown action "comments/add" on X1001 (The ACT LED isn't lit for me; does it light up even without an SSD? Or only when it detects the SSD?)
• 23:16, 1 April 2026 90.116.144.206 talk performed unknown action "comments/add" on X1001 (Hello ! Yes I saw that Crutial had a Phison, so I tries with a Samsung SSD 990 Pro NVMe M.2 Pcle 4.0 and got the exact same results. which does not have a Phison controller. But maybe, for some reason, it's not supported either ?)
• 17:03, 1 April 2026 Ruby talk contribs performed unknown action "comments/add" on X1001 (Sorry for the late reply. The main problem is compatibility. Your Crucial P310 is a PCIe Gen4 SSD with a Phison controller that cannot work at lower speeds, so the Raspberry Pi 5's native PCIe port cannot detect it. The X100x is just a PCIe adapter, which only changes the port shape and does not affect compatibility at all. The real issue is that this SSD does not work with the Raspberry Pi 5 itself. We recommend using another SSD that fully supports the Raspberry Pi 5’s native PCIe interf...)
• 22:50, 31 March 2026 90.116.144.206 talk performed unknown action "comments/add" on X1001 (I just tried with a brand new samsung nvme. Nothing, exact same results. I begin to think that this hat is a scam. The fact that nobody is even answering our questions make it shady.)
• 22:17, 31 March 2026 72.208.46.174 talk performed unknown action "comments/add" on X1001 (I am having a similar problem, did the same things, same results from lspci. I've tried two different nvme boards, same results. I posted about a week ago and my post has disappeared. Good luck)
• 22:50, 25 March 2026 90.116.144.206 talk performed unknown action "comments/add" on X1001 (Here my lspci sudo lspci 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge)
• 22:47, 25 March 2026 90.116.144.206 talk performed unknown action "comments/add" on X1001 (Hello I just bought this Geekworm X1001 PCIe to M.2 NVMe SSD Shield Top for Raspberry Pi 5 and added a Crucial P310 SSD 500Go PCIe Gen4 NVMe M.2 2280 on it. The pcie rubbon is well placed, the ssd has been tested on another pc and works fine, it's well plug in the hat. The blue LED light stays on and the config on my rasp seem fine (dtparam=pciex1, dtparam=nvme added to /boot/firmware/config.txt) Even with all this the nvme does not want to be detected. Nothing in lsblk. Do I miss somethin...)
• 23:49, 30 July 2025 87.122.13.59 talk performed unknown action "comments/add" on X1001 (Hi, does not work for me with a Verbatim Vi3000 / 256 GB. Latest firmware.)
• 22:17, 4 July 2025 49.192.144.55 talk performed unknown action "comments/add" on X1001 (Hi, I'm trying to clone my same size 2TB old USB SSD drive to the NVME PCIe Gen4 drive on a Raspberry Pi 5 using the RaspbianOS "SD Card Copier". The drive has 6 small partitions and one large one with about 1.5TB. The cloning creates all partitions just fine, it also boots from the new drive but it copies only about 60GB from the large partition. I tried the cloning again and the same thing happened but this time I could briefly see a message pop up during the cloning process saying tha...)
• 18:54, 3 July 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello, Sorry, we have not tested this model.)
• 18:27, 3 July 2025 213.194.166.147 talk performed unknown action "comments/add" on X1001 (Hello, does the Micron 2450 MTFDKBA1T0TFK work with the X1001?)
• 17:57, 25 June 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hi, Sorry, we are not sure, you can refer to the official documentation.)
• 03:09, 25 June 2025 92.212.9.220 talk performed unknown action "comments/add" on X1001 (I have been running a WD SN770M for about 3-4 days on a somewhat idle Nextcloud install with it not crashing since I adjusted the bootloader settings with "dtparam=pciex1_gen=3,aspm=off". Is setting this alright or discouraged? If the latter, why?)
• 19:09, 9 June 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello, Please try to check if the FFC cable connection is loose, or try another FFC cable.)
• 03:21, 4 June 2025 93.202.155.183 talk performed unknown action "comments/add" on X1001 (I used this HAT on a Pi 5 with a crucial P3 Plus PCIe 4.0 M.2 2280 2TB for months. With no reason the SSD isn't booting anymore. When I use a SSD USB adapter the Pi boots fine from SSD again, so it seems that the HAT is broken after 6 months. What could be the cause? How to avoid?)
• 18:29, 3 June 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello, 1/What brand of SSD are you using? Please refer to here：NVMe SSD boot with the Raspberry Pi 5 to troubleshoot the following issues first. 2/If it is confirmed that the problem is caused by insufficient power supply, you can use a 2pin cable with an XH2.54 connector to connect the RPi5 GPIO to the 5V IN port.)
• 15:39, 1 June 2025 172.58.114.209 talk performed unknown action "comments/add" on X1001 (Hello, I bought Geekworm X1001 PCIe to M.2 HAT from Amazon. I find that after an hour or so of use, I am getting I/O errors in my Raspberry PI 5 in the ssh terminal and all the UI on the screen freezes and disappears/ fails to launch. You have mentioned that it is possible to provide the HAT with extra power via XH2.54 5V power connector on the HAT. Can you pls explain how I go about doing that? What cable to use to connect to it and where should I connect that other end to source the power?)
• 10:31, 8 May 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hi,The functions are the same, but X1001 is installed on the top of the RPi5, and X1002 is installed on the bottom of the RPi5.)
• 17:14, 6 May 2025 213.142.97.54 talk performed unknown action "comments/add" on X1001 (Hi, need "presales" support: which hat to buy: X1001 ode X1002? Nearly the same techn. features. Need only better speed than sdhc. Practical tipps? Thanks!)
• 01:33, 12 April 2025 77.179.230.202 talk performed unknown action "comments/add" on X1001 (We also see problems with X1002 (bottom mount) and Intenso SSD on some RPI5s. Once we enable the Wifi the interface starts to hang and after a bit desktop disappears (all black). Anyone running into similar problems?)
• 21:20, 11 April 2025 102.159.102.240 talk performed unknown action "comments/add" on X1001 (Hello, does anyone knows if the SN850x est compatible with the Geekworm X1001 ? Thanks)
• 12:07, 19 March 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello,friend：it depends on the Raspberry Pi 5,does not depend on the X1001 board,X1001 just provides an PCIe interface for the SSD and RP5, hope to get your understanding.)
• 02:57, 19 March 2025 103.21.165.149 talk performed unknown action "comments/add" on X1001 (Does X1001 support arm64 Ubuntu 2024 Desktop version?)
• 11:50, 17 March 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hi,Sorry, WD Blue SN580 is not compatible at the moment. We recommend you use a compatible SSD for testing.)
• 11:48, 17 March 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hi,What type of SSD are you using? [WD Black SN850 series] [WD Black SN770] has compatibility issues; please try changing the SSD to test it.)
• 18:34, 16 March 2025 175.116.49.141 talk performed unknown action "comments/add" on X1001 (The WD Blue SN580 series is known to have compatibility issues. Could you suggest any possible solutions to resolve this problem?)
• 00:55, 16 March 2025 172.56.70.37 talk performed unknown action "comments/add" on X1001 (Anonymous user #41 here. I forgot to mention that I am using a WD Black that has SanDisk chips, not Phison controller...)
• 09:22, 15 March 2025 172.56.70.37 talk performed unknown action "comments/add" on X1001 (X1001 will not boot NVME 1Tb. 1Tb drive boots fine with USB3 adapter. Tried boot config changes, and eeprom changes suggested. 'Failed to open device nvme' Since no SD card, not sure if X1001 is actually working...)
• 11:12, 7 March 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (We received your email at the same time and will help you solve the problem by email. Thanks for your understanding.)
• 01:47, 7 March 2025 46.103.30.118 talk performed unknown action "comments/add" on X1001 (I have a raspberry pi 5 connected with an official pi5 PSU. My nvme gets detected but acts funny on boot and throws errors. You have sent me a shorter orange FFC cable. Is this correct? In all the videos i've seen people are using a gray connector which is slightly longer as well.)
• 16:34, 19 February 2025 45.88.97.67 talk performed unknown action "comments/add" on X1001 (Yes, metal case, so I removed it. The problems are less, but are still there. The only solution so far: switch off the WiFi and everything is good.)
• 17:41, 17 February 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello，Do you have a metal case installed? If so, remove the case and test it?)
• 21:46, 14 February 2025 216.24.216.37 talk performed unknown action "comments/add" on X1001 (Doesn't run when WiFi is enabled. If WiFi sends data at the same time and is written on the SSD, there are serious errors in the files and the file system, up to a complete failure of the whole disk. Another time the file system was completely destroyed. I switched off WiFi, inserted LAN cable, and everything works well. But if you need Wifi .... Pi 5 with Patriot M.2 P320 256GB.)
• 11:53, 22 January 2025 Lisa talk contribs performed unknown action "comments/add" on X1001 (Thanks for the update.【WD Black SN850 series; WD Black SN770; WD SN740】all have compatibility issues. Please refer to the above information: 【NVMe SSD Incompatibility List】)
• 10:17, 22 January 2025 24.211.221.158 talk performed unknown action "comments/add" on X1001 (Update: I ended up just returning my WD SN770 and ordering a Samsung 970 EVO Plus. It's working much better.)
• 03:53, 21 January 2025 24.211.221.158 talk performed unknown action "comments/add" on X1001 (!!! Nevermind... still failing :(.)
• 12:07, 20 January 2025 24.211.221.158 talk performed unknown action "comments/add" on X1001 (Thanks! This fixed random I/O errors I was experiencing with a WD_BLACK SN770 SSD and a Raspberry Pi 5. The symptoms were similar to that of "Anonymous user #20". It would boot fine but soon after some paging errors would appear in the journal and commands would fail with I/O errors (or it would just say command not found). Booted using an SD card temporarily, ran rpi-update, and booted back into the SSD. Everything works normally now.)
• 04:51, 18 January 2025 174.54.172.229 talk performed unknown action "comments/add" on X1001 (I had the 2TB Samsung 980 Pro working great until I added a pi 5 cooler. After that it no longer recognized the drive. Blue light stays on, but no boot and lspci shows nothing connected. Put the drive in a usb enclosure and it boots fine from that. Very confused why this is. I guess I'll try another drive soon.)
• 19:21, 11 December 2024 217.88.244.114 talk performed unknown action "comments/add" on X1001 (Patriot P310 and P320 are working for me. The P300 seems to exist in different versions with different controllers. One with a black circuit board and a Phison E13T controller, and one with a blue board and a SMI 2263XT controller.)
• 00:20, 11 December 2024 157.143.60.196 talk performed unknown action "comments/add" on X1001 (Anybody tested it with Patriot P300 SSD ? Thank you !)
• 09:42, 6 December 2024 Lisa talk contribs performed unknown action "comments/add" on X1001 (It is recommended that you re-flash the OS. Generally speaking, re-flash the OS can solve all problems.)
• 15:29, 5 December 2024 86.103.12.136 talk performed unknown action "comments/add" on X1001 (But this does not happen using SD-card and I already changed the SSD M2 hardware, but the issue is persisting. So what else should cause this issue, as the SSD could not be accessed by the system anymore?)