-

Main public logs

Jump to navigation Jump to search

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

Logs
  • 12:36, 30 April 2022 Harry talk contribs moved page HDMI TO CSI-2 to C779
  • 13:12, 27 December 2021 Harry talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Thanks. CSI-2-Software and it fit to the last Bullseye OS also.)
  • 09:02, 26 December 2021 86.16.172.229 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Hi please specify with image to use or at least the kernel version that works? It seems to be hit and miss.)
  • 12:15, 29 September 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Because C779 does not support audio, please remove the audio part when you test the EDID method. （The part after mkv should be removed）.)
  • 08:59, 29 September 2021 104.6.136.133 talk performed unknown action "comments/add" on HDMI TO CSI-2 (I did the edid load. I have a windows 10 laptop driving the HDMI-in to the module. After the EDID, the laptop sees the 2nd display. But no improvement using the raspivid. Also tried the gst-launch with error openning audio device, and the foo.mkv is 0 bytes. pi@raspberrypi:~ $ gst-launch-1.0 v4l2src io-mode=5 ! video/x-raw, format=UYVY, framerate=25/1 ! v4l2h264enc output-io-mode=4 ! video/x-h264,profile=high ! h264parse ! queue ! matroskamux name=mux ! filesink location=foo.mkv alsasrc dev...)
  • 15:01, 28 September 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi，Please try to use the EDID method to test it."Use gstreamer to call camera and audio" ; and please check whether the cable is plugged in properly before.)
  • 15:01, 28 September 2021 Lisa talk contribs performed unknown action "comments/delete" on HDMI TO CSI-2
  • 15:01, 28 September 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi，Please try to use the EDID method to test it. Use gstreamer to call camera and audio ; and please check whether the cable is plugged in properly before.)
  • 15:00, 28 September 2021 Lisa talk contribs performed unknown action "comments/delete" on HDMI TO CSI-2
  • 15:00, 28 September 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi，Please try to use the EDID method to test it. Use gstreamer to call camera and audio ; and please check whether the cable is plugged in properly before.)
  • 14:05, 27 September 2021 104.6.136.133 talk performed unknown action "comments/add" on HDMI TO CSI-2 (I am seeing the error opening the interface. Any clue whether the raspivid command is still applicable with this interface? I am seeing the /dev/video0 and the kernel logs show that "tc358743 10-000f: tc358743 found @ 0x1e (i2c-22-mux (chan_id 1))" pi@raspberrypi:~ $ raspivid -t 5000 -o video.h264 mmal: Cannot read camera info, keeping the defaults for OV5647 mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM) mmal: mmal_component_create_core: could not crea...)
  • 15:32, 26 September 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi，sorry，our code does not support interlaced input.we haven't tested it yet.)
  • 18:47, 24 September 2021 88.98.85.164 talk performed unknown action "comments/add" on HDMI TO CSI-2 (In the features you state "HDMI Input: 720p50\720p60\1080i50\1080p25" I am trying to make the board work with a raspberry pi with a 1080i50 (interlaced) input. raspivid -t 0 shows only a cropped area of the input. I asked the question previously and the reply from Lisa was "Hi，1080p50fps input: need to specify the encoding format； Please refer to the method called with gst" I am not trying to use 1080p50fps (progressive) but 1080i50 (interlaced). I don't understand how the encoding format is...)
  • 16:05, 9 September 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi,Sorry, we don’t have more information about it, or you can ask on the official Raspberry Pi forum.)
  • 16:02, 9 September 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi，1080p50fps input: need to specify the encoding format； Please refer to the method called with gst)
  • 15:50, 6 September 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi，If you want to DIY a case, please consider its size. But because each user's operating environment and Raspberry Pi load are different, we can't provide more other data.)
  • 05:28, 5 September 2021 88.81.88.250 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Hi :-)! I have Rpi4 with 4GB RAM. module is OK working for my purpose. next step I need to read the aux metadata from my camera... I would like to read the HDMI trigger function (REC/STBY) of the camera... It is supposed to be some flag with video signal. Do you know something about this?? Thanks!)
  • 09:29, 4 September 2021 87.249.177.252 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Hi What is the recommended way to mount the card to a raspberry pi 3B, in my case. Does it need a fan, if it gets hot? What is the average working temperature for the card? How high needs it be between the floor inside a case? For example 5 mm or what, 5 mm ontop?)
  • 02:32, 24 August 2021 88.98.85.164 talk performed unknown action "comments/add" on HDMI TO CSI-2 (I am unable to make this work with a 1080i50 input. raspivid -t 0 shows a cropped area of the screen. Do you have an example for interlaced input please?)
  • 11:56, 6 August 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi，can gopro5 force HDMI output? In addition, have you tried the EDID method? Please contact us support@geekworm.com； and please tell us your order NO.)
  • 11:33, 6 August 2021 Lisa talk contribs performed unknown action "comments/delete" on HDMI TO CSI-2
  • 20:54, 5 August 2021 47.251.4.198 talk performed unknown action "comments/add" on HDMI TO CSI-2 (First of all, can gopro5 force HDMI output? In addition, have you tried the EDID method? You can ask me questions in my email, 1767893964@qq.com , I'll send you my usage)
  • 16:27, 5 August 2021 23.81.176.114 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Hi, I have a GoPro Hero 5 like the one in the demo video. I have the camera interface enable on my Raspberry Pi 4 and video0 is in /dev. And I did all the driver config I tried to run the script in FAQ - A2. It's giving me error saying "camera is not enable. try running 'sudo raspi-config'". Also, my GoPro has the output when I plug it into a monitor, but when I plug it into this module, it's not going into the HDMI output mode. I tried 1080p 24, 1080p 25, 720p 24. None of them work. Please s...)
  • 04:40, 4 August 2021 173.54.16.17 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Tests with: Sony NEX5 mmal: mmal_vc_component_enable: failed to enable component: ENOSPC mmal: camera component couldn't be enabled mmal: main: Failed to create camera component mmal: Failed to run camera app. Please check for firmware updates Sony NEX5N image output success but scrambled. Possible issue with camera only outputting 60hz? Video capture clips also success, also scrambled.)
  • 10:47, 2 August 2021 98.212.135.212 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Sorry, that should have been anonymous #5.)
  • 10:47, 2 August 2021 98.212.135.212 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Dear Anonymous #6 - I tried something similar, connecting the HDMI output from a Pi 2 to the HDMI2CSI board. It didn't work. It appears that the Pi 2 insisted on 60fcs. I don't know if the Pi 4 is smarter, or if there's a way to tell it to use 25fcs for that output.)
  • 11:48, 16 July 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hello，friend： Sorry we haven't tested like that and cannot guarantee compatibility.)
  • 21:56, 15 July 2021 87.7.66.213 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Hello, I have a VGA output (analogic signal) from an old pc, if I use an adapter VGA to HDMI, this adapter HDMI to CSI will work correctly?)
  • 14:37, 12 July 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hello， sorry that there is no matching Case at the moment)
  • 19:05, 9 July 2021 136.228.208.127 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Hello Which case can you recommend for the PI4 and the raspberry pi HDMI to CSI-2 Module ?)
  • 18:51, 18 June 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hello，Sorry I didn't understand your question well,could please tell us why you unplug the cable? Which cable to unplug?)
  • 18:20, 18 June 2021 Lisa talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hello，We do not recommend using resolution standards that exceed the requirements.)
  • 03:40, 8 March 2021 5.173.169.82 talk performed unknown action "comments/add" on HDMI TO CSI-2 (What if I use this with 4K resolution? It won't work or just resolution will be downgraded?)
  • 13:06, 22 February 2021 71.167.132.96 talk performed unknown action "comments/add" on HDMI TO CSI-2 (what if you get the green light and the vifeo0 and it still has no picture and all sources of video have been verified?)
  • 13:59, 30 January 2021 12.232.133.130 talk performed unknown action "comments/add" on HDMI TO CSI-2 (It says above the OctoPi is not supported.)
  • 02:19, 28 January 2021 196.188.243.168 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Should I unplug the cable after connecting) Tags: Mobile edit Mobile web edit
  • 10:25, 26 January 2021 108.30.122.153 talk performed unknown action "comments/add" on HDMI TO CSI-2 (I'm trying to use the HDMI card with OctoPi and a GoPro Hero3 but getting this error: pi@octopi:~ $ raspivid -p -f The driver for the TC358743 HDMI to CSI2 chip you are using is NOT supported. They were written for a demo purposes only, and are in the firmware on an as-is basis and therefore requests for support or changes will not be acted on. mmal: mmal_vc_component_enable: failed to enable component: ENOSPC mmal: camera component couldn't be enabled mmal: main: Failed to create camera co...)
  • 14:05, 15 January 2021 96.29.128.102 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Can you send the raspberry pi output to the camera? I tried this and am getting errors even though video 0 is showing up. I am using a raspberry pi 4 with two hdmi outputs so I am sending one back into the camera. I know this sounds wierd but I have a reason to do this. I was just wondering if anyone else has tried it and got it to work.)
  • 00:09, 31 December 2020 65.185.150.230 talk performed unknown action "comments/add" on HDMI TO CSI-2 (RPI 8g new install camera enabled)
  • 00:07, 31 December 2020 65.185.150.230 talk performed unknown action "comments/add" on HDMI TO CSI-2 (All setup according to above instructions. run above python code from picamera import PiCamera from time import sleep camera = PiCamera() camera.start_preview() sleep(1000) camera.stop_preview() Python 3.7.3 (/usr/bin/python3) >>> %Run TestHDMIinput.py mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM) mmal: mmal_component_create_core: could not create component 'vc.ril.camera' (1) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/p...)
  • 07:41, 30 December 2020 97.113.84.252 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Does this component send EDID to the connected device to negotiate comparable resolutions?)
  • 17:29, 7 December 2020 Xiali talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hi dear ,Yes ,it supports audio passthrough,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 16:21, 7 December 2020 52.56.99.60 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Does this support audio passthrough?)
  • 16:48, 28 August 2020 Cindy talk contribs performed unknown action "comments/add" on HDMI TO CSI-2 (Hello sir, Both Raspberry Pi 3 or Raspberry Pi 4 are OK to use with this HDMI to CS2 .)
  • 14:19, 21 July 2020 158.140.184.158 talk performed unknown action "comments/add" on HDMI TO CSI-2 (Hello, What model of Raspi can use this HDMI to CS2 module? Can I use Raspi 3 model B or must be Raspi 4 ?? Tks) Tags: Mobile edit Mobile web edit
  • 12:26, 24 April 2020 Abby talk contribs created page HDMI TO CSI-2 (Created page with "{{GD Template Impl}} ==Overview== == Packing List == * 1 x Raspberry Pi HDMI to CSI-2 Module * ==Features== * Module: Raspberry Pi HDMI IN * Function: HDMI to CSI-2 * Limi...")
Retrieved from "https://wiki.geekworm.com/Special:Log"