-

Main public logs

Jump to navigation Jump to search

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

Logs
  • 15:36, 9 April 2026 Ruby talk contribs performed unknown action "comments/add" on EDP to HDMI Adapter (Sorry for the late reply. Hope this information helps: :*30 Pin: 1080P EDP IN, FFC-30PIN-0.5 :*40 Pin: 4K EDP IN, FFC-40PIN-0.5 Differential data pairs in the EDP cable should use twisted-pair wiring.)
  • 06:29, 20 March 2026 154.20.139.127 talk performed unknown action "comments/add" on EDP to HDMI Adapter (What is the part number of the 40 pin connector on the board? Do you have any part numbers for compatible cables?)
  • 18:18, 9 March 2026 Ruby talk contribs performed unknown action "comments/add" on EDP to HDMI Adapter (Hi there! 1. Is this compatible with 1920x1200 input? ==Yes, it supports 1920x1200 input. Just set your mainboard to force 1920×1200 output (the mainboard EDID defaults to 1920×1080 automatically). 2. Can I buy the customized part with 30-pin connector removed? ==The 40-pin connector works with both 2-lane and 4-lane. As long as ① your mainboard forces 1 eDP signal output, and ② the 40-pin wiring matches, you can use only the 40-pin connector — no need to remove the 30-pin connector.)
  • 16:17, 27 February 2026 174.67.129.172 talk performed unknown action "comments/add" on EDP to HDMI Adapter (Can I buy the customized part with 30-pin connector removed as below?)
  • 16:14, 27 February 2026 174.67.129.172 talk performed unknown action "comments/add" on EDP to HDMI Adapter (Is this compatible with 1920x1200 input?)
  • 12:23, 12 December 2025 Ruby talk contribs performed unknown action "comments/add" on EDP to HDMI Adapter (We can customize an EDID HAT for you with the following adjustments: 1.Remove the 30-pin connector 2.Flash the 4-lane EDID Please note that laptops rely on the graphics card to read the EDID and adjust the output automatically. Some graphics cards may have compatibility issues, so we can’t guarantee the device will work right away. Additional debugging may be needed.)
  • 13:19, 11 December 2025 174.67.129.172 talk performed unknown action "comments/add" on EDP to HDMI Adapter (Hi there, I am the commenter who asked about the 4K 60 Hz signal below. I wanted to reply to your post about finding a suitable EDP-HDMI adapter for my laptop motherboard. The output resolution is 3840 × 2160 and the output signal is 4 lanes. Thanks!)
  • 12:20, 21 November 2025 Ruby talk contribs performed unknown action "comments/add" on EDP to HDMI Adapter (Hi there! "Will the adapter support 4K 60 Hz from a laptop motherboard if the front 30 pin interface is desoldered?" >>==Not recommended—even if you desolder the front 30-pin interface, the screen may still fail to display. If you need a suitable EDP-to-HDMI adapter for your laptop motherboard, we’d be happy to help! Could you share a couple of details: ① What’s the output resolution of your laptop? ② How many lanes is your laptop’s output signal? With these, we could recommend a product...)
  • 05:33, 21 November 2025 174.67.129.172 talk performed unknown action "comments/add" on EDP to HDMI Adapter (You wrote that "Because the laptop motherboard is adaptive output, the front 30pin interface interferes with the 4K60HZ high speed signal, so can not use 40PIN, you can only connect to the 30PIN interface." Will the adapter support 4K 60 Hz from a laptop motherboard if the front 30 pin interface is desoldered?)
  • 09:09, 5 July 2025 191.95.146.101 talk performed unknown action "comments/add" on EDP to HDMI Adapter (You should check whether the video output is 4-lane or 2-lane. Version 1.3 of the card includes a switch that allows you to select this option.)
  • 09:06, 5 July 2025 191.95.146.101 talk performed unknown action "comments/add" on EDP to HDMI Adapter (Hello, every time you connect or disconnect eDP connections, you must do so from a cold start. Make sure both the battery and the voltage adapter are disconnected during the process. Once the connection is secure, you can energize the circuit; otherwise, you risk causing a short circuit.)
  • 17:32, 29 May 2025 78.23.23.78 talk performed unknown action "comments/add" on EDP to HDMI Adapter (I have v6.2 30 pin of this board. Can't get it to work with my HP Omen15-ax201tx, the cable is DD0G35LC001)
  • 15:20, 6 January 2025 Lisa talk contribs performed unknown action "comments/add" on EDP to HDMI Adapter (Hi,This is a EDP to HDMI Adapter, NOT support [HDMI to EDP].)
  • 10:20, 5 January 2025 150.252.164.126 talk performed unknown action "comments/add" on EDP to HDMI Adapter (Will this work in the other direction i want to input hdmi and out put 40 pin edp. connecting a desk top to an old lap top screen.)
  • 23:34, 14 October 2024 155.31.35.78 talk performed unknown action "comments/add" on EDP to HDMI Adapter (I'm still trying to figure out how to plug in the edp cable into the board. Every time the wire makes contact, the board heats up and burns.)
  • 15:11, 31 March 2022 Harry talk contribs created page EDP to HDMI Adapter (Created page with "{{GD Template Impl}} ==Overview== ==Features== ==Packing List== ==User Manual== <!--Add review function! --> <comments /> <!--Please choose the --> <!--Remove other cate...")
Retrieved from "https://wiki.geekworm.com/Special:Log"