Orange Pi Plus 2E

From Geekworm Wiki
Revision as of 18:05, 1 September 2018 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

orange pi plus 2E arcylic case
orange pi plus 2E arcylic case

Overview

Orange Pi Plus 2E

Acrylic Case

Overviews: It is a perfect case & cooling fan kit for Orange Pi Plus 2E, it only needs four screws to install your Orange Pi Plus 2E in the transparent case.

Every piece of cases has double-sided protective film, please take them off before installation.

Notice: Not include Orange Pi Plus 2E board.

Installation Guide:

  • Step1: Install the cooling fan onto the top shell.
  • Step2: Mount the bottom shell to the Orange Pi Plus 2E.
  • Step3: Plug the power cable onto the GPIO port (follow instructions on Picture)
  • Step4: Install the two side shells,then istall the front shell with network and USB openning
  • Step5: Install the top shell with colling fan.
  • Step6: Install the last shell, then you make it work as the picture below.

Orange-pi-plus-2E-arcylic-case-Install.jpg

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Retrieved from "https://wiki.geekworm.com/index.php?title=Orange_Pi_Plus_2E&oldid=6358"