Raspberry pi 0.91 inch OLED Module SKU:385011

From Geekworm Wiki
Revision as of 17:13, 1 September 2018 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Raspberry pi 0.91 inch OLED Module sku:385011

Raspberry pi 0.91 inch OLED Module sku:385011

Instruction

Stacking 0.91" OLED Module for Raspberry Pi / Arduino / Banana PI / PCDuino (128 x 32). 0.91 inches 128x32-resolution OLED display, high-speed, low-power, programmable and flexible configuration and so on.

Features

  • Support 3.3V/5V two kinds of power supply (toggle via switch).
  • Data input/output via the I2C bus, compatible with 3.3V/5V level (toggle via switch).
  • Resolution: 128x32.
  • Can be used independently, can also be used with our Cascading and Overlapping Multi-Function Sensor Expansion Board(sku. 357254)
  • Compatible with raspberry pie(Raspberry pi 2 Model B / B+ / B / A+), banana pie, cubieboard, pcduino, Arduino etc.
 How to use OLED display module
 How to connect
 How to check if connect to I2C device

Packing List

  • 1 x OLED Module

Application

Stacking 0.91" OLED Module can used with board Cascading and Overlapping Base Board SKU:357254

  • Oled6220.jpg
  • Oled6221.jpg
  • Oled6223.jpg
Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Retrieved from "https://wiki.geekworm.com/index.php?title=Raspberry_pi_0.91_inch_OLED_Module_SKU:385011&oldid=6308"