GPS Module SKU:384916

 ⚠️  Deprecated: This page is outdated and may contain inaccurate information. It is kept for reference only. 

Raspberry Pi GPS Module SKU:384916

Raspberry Pi GPS Module SKU:384916

Instruction

GPS Module w/ Ceramic Passive Antenna for Raspberry Pi / Arduino

Features

• Use U-BLOX NEO-6M modules, high performance;
• With ceramic antennas;
• Set parameters via serial port, and can be saved into the EEPROM;
• Compatible with 3.3V/5V level, easily connect to other single-chip microcomputer system;
• With backup rechargeable battery, battery can last about half hour after the power is shut down. you can keep the calendar data.

Note:

Because the TXD and RXD pin are be connected a 510ohm resistance to compatible with 3.3V/5V, so you need to use the low resistance cable to connect (example: some USB TTL cables will lead to error).

Packing List

• 1 x GPS module