C790
Overview
C790 is an upgraded version of C779, C790 has made the following upgrades.
- Solved the issue of back powering of HDMI IN interface
- New added interface to support I2S audio
- C790 supports CSI-2 2 lane and 4lane at the same time
Hardware Parameters
- Compatible with Raspberry Pi 5/4B/3B+/3B/Zero/Zero W/Zero 2W/CM4/CM3
- HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only use with CM4)
- HDMI to CSI-2 bridge chip:Toshiba TC358743XBG
- 4 CSI-2 channels & clock (Pi 4 and Pi Zero only support 2 lan, max 1080P@50fps, and CM4 can support 4 lan, max 1080P@60fps)
- The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C790 module.
- The CSI-2 interface, with 22 pin FPC seat, spacing 0.5 mm, is located on the back of the C790 module.
- Size: 30 x 45 mm
- Power supply:3.3V
- Weight: 10g
Packing List
- 1 x C790 HDMI to CSI-2 Module
- 1 x 15cm Length FPC 15pin 1.0mm cable (for Pi 5B / 4B / 3B / 3A)
- 1 x 15cm Length FPC 22pin 0.5mm cable (for Pi Zero / Zero W / Zero 2W / CM4 / CM3)
- 1 x I2S cable (15cm length)
User Manual
- Due to the absence of hardware encoding on the Pi 5B, the software usage instructions for Pi platforms are currently divided into two sections: Pi 5B configuration and configuration for other Pi platforms.
- In platforms such as Zero, Zero 2, Pi 3B, Pi 4B, etc., there is a reference for testing HDMI to CSI module demo: C779-Software or Raspberry pi official forum post
- Pi 5B platforms HDMI to CSI module test demo reference: CSI Manual on Pi 5
- Refer to: https://wiki.blicube.com/blikvm/en/hdmi-csi-i2s/
Enable comment auto-refresher
Anonymous user #2
Permalink |
Anonymous user #1
Permalink |
Lisa
Harry