Product Overview
|
|
Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B |
|
|
VOLUMIO, MOODE |
|
|
Key Features |
|
ESS Technology flagship DAC cipset (ES9028Q2M) for best sound quality | |
|
129dB DNR -120dB THD+N | |
|
32bit/384kHz Bit to Bit Playback & Native DSD Playback (Use with our XMOS I2S module) | |
|
JRC MUSES8920 high quality Audio J-FET input dual OP AMP | |
|
Ultralow phase noise 100MHz HiFi TCXO | |
|
Texas Instruments ultra-low-noise voltage regulator | |
|
Dedicated individual DVCC, AVCCL, AVCCR, Oscillator 3.3V power supply | |
|
Selected high quality components (WIMA Film capacitor, Panasonic low ESR aluminum electrolytic capacitor, Gold-plated RCA connectors etc) | |
|
Can connect to our XMOS USB-to-I2S module directly | |
|
Can be used individually with only 3 wire I2S signal connected from other i2s interface | |
|
All dual OPAMP in single dip8 package IC can be used | |
|
High performance and compact Raspberry Pi DAC solution for everyone | |
|
Specification | |
|
Power supply: +5Vdc ±5%, +15Vdc ±5%, -15Vdc ±5% | |
|
Analog audio output level: 2V RMS | |
|
Resolution/Sampling Rate: Up to 24bit / 192KHz (Raspberry Pi I2S);Up to 32bit / 384KHz (Use with XMOS USB to I2S board);DSD64 /DSD128 (Use with XMOS USB to I2S board) | |
|
PCBA size : 101.5 x 56mm x 34.5mm, PCB size : 85 x 56mm | |
|
|
Key Features |
|
Fully regulated linear power supply board for X10 / X20 series DAC | |
|
Texas Instruments ultralow noise TPS7A470x regulator | |
|
Four individual 5.2V/ 5.0V/-15V/+15V to power the Raspberry Pi (1), DAC chipset and OPA | |
|
High performance ELNA and Nichicon Audio Purpose Capacitors | |
|
For use with R-core transformer | |
|
Specification | |
|
Input rating : 6VAC ±5% 2.5A, 6VAC ±5% 0.5A, 15VAC ±5% 0.55A, 15VAC ±5% 0.55A | |
|
Output voltage：5Vdc ±5% 2.5A, 5Vdc ±5% 0.5A, +15Vdc ±5% 0.5A, -15Vdc ±5% 0.5A | |
|
PCBA size : 85mm x 56mm x 50.5mm, PCB size : 85 x 56mm | |
|
Notes | |
|
Low voltage indicator might show up during boot, it does not affect audio performance. | |
|
WARNING: | |
|
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET. | |
|
|
Key Features |
|
For use with X10-PWR power supply board | |
|
High quality 35W R-core transformer | |
|
Equipped with AC voltage selector switch convenient to select 115/230Vac input | |
|
Lighted power switch | |
|
Equipped with detachable power cord | |
|
Full aluminum chassis | |
|
Specification | |
|
Input : AC110 / 230V ~50 / 60Hz | |
|
Output： 6VAC ±5% 2.5A, 6VAC ±5% 0.5A, 15VAC ±5% 0.55A, 15VAC ±5% 0.55A | |
|
Size 118m x 93mm x 59mm | |
|
|
Key Features |
|
The XMOS xCORE-AUDIO Hi-Res family of parts | |
|
Deliver precise output with low noise/distortion for soothing, high-quality sound | |
|
Ideal HiFi audio solution for Raspberry Pi | |
|
Streamed through Raspberry Pi to I2S, DSD and/or S/PDIF interfaces | |
|
PCM up to 32bit /384 KHz sample rates | |
|
Native DSD, DoP64 and DoP128 | |
|
Up to 192 kHz, 16/24 bit resolution S/PDIF output | |
|
Asynchronous Isochronous transfer from Raspberry Pi | |
|
Multiple OS support (Volumio, Moode Audio Player, Windows, Android etc) | |
|
SiTime SiT8208 ultra performance oscillator | |
|
Texas Instruments ultra-low-noise voltage regulator | |
|
Specification | |
|
Power supply: +5Vdc +/-5% | |
|
CODEC: I2S 16, 24, or 32 bit PCM, DSD64 and DSD128 | |
|
PCM sample rates : 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384KHz | |
|
Optional S/PDIF output : Up to 192 KHz; 16/24 bit resolution | |
|
PCBA size : 101.5 x 56mm x 34.5mm, PCB size : 85 x 56mm | |
|
|
Key Features |
|
Uses TI TPA6120A2 as headphone chip | |
|
SNR of 128dB A-Weighted and THD of 112.5dB | |
|
Current-Feedback Architecture | |
|
The best class AB high fidelity headphone amplifier for diyer to enjoy | |
|
Original ALPS RK27 potentiometer | |
|
0.1% low noise thin film resister | |
|
6.35mm and 3.5mm earphone output jack | |
|
Specification | |
|
Power supply: +15Vdc ±5%, -15Vdc ±5% | |
|
Output power: 150MW /250, 300MW /120, 1000MW /32 | |
|
Frequency response: 20hz-30khz | |
|
PCBA size : 124mm x 56mm x 37.5mm, PCB size : 85 x 56mm |
Document
- User Manual: X20_HiFi
- Chinese User Manual: File:X20-Kit-Guide-CN.pdf
FAQ
Q: Can I use the X10-I2S and X10-PWR without X20-DAC board?
A: Yes，but only supports coaxial and optical fiber output. Not recommended for use with other DAC boards, compatibility cannot be guaranteed.