P580

P580-V2 Interface

P580 Interface

P580/P580-V2

P580 / P580-V2 Size

P580 Case, compible with X1002

P580 Case

Overview

The P580 case is compatible with raspberry pi 5 and the X1002 shield.

Note: On July 9th of 2024, we released a new P580-V2 case.

So far there are two version of P580 case, P580 and P580-V2. the cases are compatible with different PIP boards, please make sure you get the correct version.

Model	Compatible PIP Board	Matching Cooler	Case Dimension
P580	X1002 / Pimoroni NVMe Base(prepare 4pcs M2.5*4+5 F/M spacer yourself)	Official Cooler / Argon THRML Cooler / H505/H501	90.8x69x35.8 mm / 3.57x2.72x1.41 inch
P580-V2	X1002 / X1005 / Pimoroni NVMe Base(prepare 4pcs M2.5*4+5 F/M spacer yourself)	Official Cooler / Argon THRML Cooler / H505/H501	90.8x69x35.8 mm / 3.57x2.72x1.41 inch

Features

Model: P580 / P580-V2
Compatible with Raspberry Pi 5
P580 is compatible with X1002 only, P580-V2 is compatible with X1002 / X1005
Compatible with Raspberry Pi 5 official cooler or the third party cooler.
Easy to install, excellent heat dissipation

Packing List

1 x Metal case P580
4 x M2.5x6 F/F spacers (Used to replace the copper M2.5*5 F/F spacers in the X1002 packing list)
4 x KM2.5x4mm screws
1 x 4pcs rubber pads

User Manual

How to Install X1002

How to Install X1002 & P580

When install X1002 with the P580 metal case, must use the M2.5x6mm F/F spacers inside the P580 case packing list to replace the M2.5x5mm F/F spacers in the X1002 packing list.

Installation Video of X1002 & P580 Case: https://youtu.be/Dn5eowo7_Qw

FAQ

Q: X1002 can't boot when install into the P580 case?

A: Please check if the FPC cable touch the metal case make shorting when install X1002 into the metal case, you can stick the electrical tape on the case to prevent the ribbon FPC cable from contacting the case to test. We have considered extending the metal case, but it may cause other issues, so we will maintain the current design. If such an issue occurs, users will need to use electrical tape to fix it. Thank you for your understanding!

Q: Does the P580 case support the pimoroni base nvme shield and 3rd party pcie bottom hats?

A: The spacers for the pimoroni base nvme shield are M2.5x7 F/F ，we recommend changing M2.5x7 F/F to M2.5x6 F/F (included in the P580 packing list), and you need to prepare 4pcs M2.5*4+4 or M2.5*4+5 F/M standoffs to supplement the bottom height. You can also refer to this user's feedback.P580#comment-4712

You can also refer to the P580 case size chart below to check whether your PCIe board supports P580

Enable comment auto-refresher

Anonymous user #11

4 months ago

Score 0

Hi, I see both cases support the Pimoroni base. Would your cases work with Pimoroni Duo base? Thanks!

Permalink | Reply

Lisa

3 months ago

Score 0

Hello,We haven't tested it yet, but if the Pimoroni Duo base has the same dimensions and mounting hole positions as the Pimoroni base, it should work with the P580 case.

Permalink

Anonymous user #10

6 months ago

Score 0

Can POE HAT fit in this case? Thanks.

Permalink | Reply

Lisa

6 months ago

Score 0

Hi,Sorry,we have not tested POE HAT yet, you can refer to the size of P580--height: 35.8mm, pi5+X1002 height : 11.6mm;

Permalink

Anonymous user #10

6 months ago

Score 0

Thanks. Found a thread on Reddit, a user managed to fit POE HAT with GPIO pins clipped.

Permalink

Anonymous user #9

6 months ago

Score 0

Right, that seems logical. I just hope there is enough clearance between my ssd and the Pi. I have ordered a box of m2.5 standoffs and some m2.5*4+6, lets see how it works out.

I also figured that if you flip the Pimoroni base over, you can mount it as a hat with the right standoffs. Then you can use the Geekworm P579 case as well. That might be a better option to keep all the parts cool, as the NVMe won't be squeezed up close to the Pi5 board.

Thanks for your help Lisa.

Permalink | Reply

Anonymous user #7

7 months ago

Score 0

Will this case work with the Pimoroni NVMe hat as well? I do not have the X1002 hat as it is hard to get in India. So, I got the Pimoroni bottom hat and now I'm looking for a case that'll fit.

Permalink | Reply

Harry

6 months ago

Score 0

Hello

Refer to the P580 case size chart below to check whether your PCIe board supports P580:

Permalink

Anonymous user #8

6 months ago

Score 0

I see, thanks. The pimoroni hat has its ssd in between the hat and pi5, and their clearance is 7mm. There still might be a way to make it fit, but I am not sure I have the exact mounting hardware. Thanks Harry.

Permalink

Lisa

6 months ago

Score 0

It is recommended to replace the pimoroni spacers with M2.5*6mm (included in the P580 packing list); and you need to prepare 4pcs M2.5*4+4 or M2.5*4+5 spacers to fix the bottom.

Permalink

Anonymous user #6

7 months ago

Score 0

My wifi no longer works once the raspberry pi & X1002 are installed in the case. Do you have recommendations on how to resolve this?

Permalink | Reply

Lisa

7 months ago

Score 0

Hi，Sorry, we don't have a better solution. It is recommended that you use a network cable instead of wifi.

Permalink

Anonymous user #5

7 months ago

Score 0

Been trying to buy the P580 and X1002 on Amazon. There is none of them in Amazon Sweden.

Could instead buy the P579 (available on Amazon Sweden) but X1001 is not available.

Permalink | Reply

Lisa

7 months ago

Score 0

Hi,We have sent X1001 to the Amazon warehouse, but it may take some time for the warehouse to receive it. If you want to buy the X1002+P580; you can purchase this kit here.https://www....2304169.html

Permalink

Anonymous user #4

9 months ago

Score 0

Purchased the X1002 NVMe bottom board shield and the compatible P580 case. The case is okay, but there is no button for the RPi5's on off button, just a cutaway on the case. This means that I will have to insert an object into the cutaway to reach to button, which is a few mm back from the outside wall of the case. Geekworm, a simple button would make the case a lot nicer. Other than that, no complaints.

Permalink | Reply

Harry

9 months ago

Score 0

Thank you for your feedback. It may be that the plastic case is the final case and we will consider designing & manufacturing a plastic case as well!

Permalink

Anonymous user #3

9 months ago

Score 0

Amazon carrying P579 for HatDrive Top mount. No P580 offering on Amazon. Ordering X1002 would have liked to get the P580 as well. 10-18 days shipping from geekworm.com - unfavorable. Too much time passing means crushed or mangled product on delivery, if no delay.

Rocky, aka anonymous #3

Permalink | Reply