X703

X703 V1.2 Function Header-New

X703 Function Header-Old

File:X703-03.jpg

X703 Interface

X703 V1.2 Dimensions-New

X703 Application

Update History

NOTE: The X708, X703 UPS does not support Raspberry Pi 5.

The latest version currently on sale is X703 V1.3, which is actually the NEW-X703 V1.2, with only the difference in silk screen printing.

In July 8th 2022, the X703 V1.2 UPS has done a small update,the "AON" Pin has been updated to "PON" Pin, also the pcb components position will be a little difference. Please refer to the below photo:

Note

NOT supports software safe shutdown.
Please use the type-c of the X703 to charge instead of the Raspberry Pi 4
Please use high quality power supply, the low quality power supply will generate surge Voltage, which will damage the board chip. we recommend Panasonic brand NCR18650BD 18650 lithium battery.
If 【CHG】 pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If 【CHG】 pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the 【CHG】 jumper is to extend the life cycle of the battery by reducing the number of recharges.
If【PON】 pin is SHORT, power always on, power button disabled; If【PON】 pin is OPEN, press power button to turn on, and hold 3s to turn off.
Be sure to power off & remove the 18650 battery then wait for 2 seconds when toggle charging mode

Overview

The X703 is a new design UPS board which is specially designed for Raspberry Pi 4 Model B only. It provides an advanced uninterruptible power supply and power. The X703 adds 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable.

Safety Instructions and Warnings

You must read these safety instructions and warnings before charging your batteries.

Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
Do not mix and use old batteries and new batteries, or batteries with different brand names.
Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X703 on the wood material or carpet and unattended.
Must keep the X703 away from children.
Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/

Features

Smart Uninterruptible Power Supply (UPS)
ultra-thin
Supports 3A via Type-C socket fast charging
Add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable.
Only work with single 18650 Lithium Ion battery
Integrated battery protection circuit
Integrated over current protection and over voltage protection
On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
On-board red LED show the status of battery charging or fully charged
On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)
Allows power input via Type-C socket or XH2.54 connector
On-board 2-Pin PH2.0 connector allows to connect external power switch
DON'T supports software safe shutdown.

Specifications

Power supply via Type-C socket: 5Vdc ±5%, ≥3A;
UPS output: 5.1V ±5% Max 3A
UPS charging current: 1A
Terminal Battery Voltage: 4.2V
Recharge Threshold: 4.1V

Packing List

1 x X703 18650 UPS Shield
1 x Jumper link Pitch 2.54mm
6 x M2.5 *4mm Screws
2 x M2.5 *5+3mm Spacers
2 x M2.5 *5mm Spacers

User Manual

Dimensions source file (DXF): File:X703-V1.dxf - You can view it with Autodesk Viewer online

18650 battery dimension

Do not use 18650 battery with built-in protection circuit

FAQ

Q1: Will X703 UPS work with the rpi poe hat?

A:No, the X703 UPS does not support rpi poe hat.

Enable comment auto-refresher

Anonymous user #10

6 months ago

Score 0

Is there a way to have a step file or a 2d file with dimension so we can draw our own case?

Permalink | Reply

Lisa

6 months ago

Score 0

Hi，You can download it here：X703#User_Manual

Permalink

Anonymous user #9

15 months ago

Score 0

What does "NOT supports software safe shutdown" exactly mean? How do I shut down the raspberry then?

Is it only possible with the blue button? Oder can I use "sudo shutdown now" command via shell?

Permalink | Reply

Walker

15 months ago

Score 0

NOT supports software safe shutdown means that the function of safe shutdown cannot be realized by inputting commands or other operations.

At present, the shutdown function can be realized through the blue button on the X703

Permalink

Anonymous user #8

15 months ago

Score 0

Where can I find the schematic of this product?

Permalink | Reply

Anonymous user #7

17 months ago

Score 0

Definitely heed the warnings about using the USB-C input on the PI or changing headers while plugged in or having batteries in it.

One of mine started smoking immediately. Pull the batteries and everything seems ok now. Just set it up and don't touch it after. Get your pi setup first and add this last.

Permalink | Reply

Walker

16 months ago

Score 0

Thank you very much, when using the power supply or battery, we must pay attention to the relevant precautions

Permalink

Anonymous user #6

26 months ago

Score 0

The X703 requires add. space for the Raspi 4.

Is there any recommendation from your side regarding a good fitting case?

Permalink | Reply

Lisa

26 months ago

Score 0

Hi，There is currently no matching case for x703 + Pi4.

Permalink

Anonymous user #5

26 months ago

Score 0

Do you have any recommendations for a good battery that I can use with X703?

Permalink | Reply

Lisa

26 months ago

Score 0

Hi，

Please use high quality 18650 battery such as Panasonic. And note the battery size（Please choose a flat-top battery, and the battery with a raised positive electrode is larger in size.）

Permalink

Anonymous user #4

34 months ago

Score 0

Can battery % be read?

Permalink | Reply

Lisa

33 months ago

Score 0

Hello，

X703 not support reading battery voltage and percentage.

Permalink

Anonymous user #3

34 months ago

Score 0

Had you a drowing about the borings?

Permalink | Reply

Anonymous user #2

36 months ago

Score 0

If mains power from charging adapter disappears, for example because of a power outage, will X703 take over powering the Raspberry PI without shutdown/reboot?

Permalink | Reply