Open main menu
Geekworm Wiki

Comments log

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 00:02, 10 May 2024 85.60.35.153 talk posted a new comment on X1003 (I tried with integral m2 NVMe gen3 x4 2230 and it does not work, but I do not know why. When the x1003 has the m2 connected no led is turned on. Only after I connect the PSU it blink a led from the m2 (not the x1003). If I disconnect the m2 and connect the PSU I can see 2 blue leds of the board. Then what is happening here? no led from the board means no power? I can't get the m2 recognized in the rpi5. Is the board fault? is the ssd? I need help with this.)
  • 20:38, 9 May 2024 88.98.197.180 talk posted a new comment on P580 (Thanks. Found a thread on Reddit, a user managed to fit POE HAT with GPIO pins clipped.)
  • 15:59, 9 May 2024 95.73.54.49 talk posted a new comment on How to Configure RAID Setting (Hi, How can I check health of the each disk in hardware RAID mode?)
  • 15:18, 9 May 2024 Lisa talk contribs posted a new comment on X1201 (Hi,No need to setup a jumper and it automatically switches to being powered by the battery when power is removed. but please to make sure that your battery is not a low battery.)
  • 16:06, 8 May 2024 Lisa talk contribs posted a new comment on XScript (Hi，Please check if the [FAN FS] is shorted by Jumper Cap.)
  • 21:47, 7 May 2024 1.64.154.121 talk posted a new comment on XScript (I also using raspberryOS 64bit(bookworm))
  • 21:45, 7 May 2024 1.64.154.121 talk posted a new comment on XScript (Hi, I followed this guide and now xoff works, but the fan not move at all. It show active and enabled when I enter "sudo systemctl status x-c1-fan.service". Is it the fan broken or have any suggestion to debug?)
  • 14:41, 7 May 2024 Lisa talk contribs posted a new comment on P580 (Hi,Sorry,we have not tested POE HAT yet, you can refer to the size of P580--height: 35.8mm, pi5+X1002 height : 11.6mm;)
  • 11:15, 7 May 2024 Lisa talk contribs posted a new comment on X1202 (pogo pins is power to Pi 5)
  • 11:09, 7 May 2024 Lisa talk contribs posted a new comment on X1202 (Hi,①momentary switch port: XH2.54-2P; ②the functions of external switche and onboard switche are the same.)
  • 10:40, 7 May 2024 Lisa talk contribs posted a new comment on XScript (Hi,Sorry,we have not tested the Debian yet, you can refer to other users' feedback.XScript#comment-4426 or XScript#comment-4046)
  • 09:07, 7 May 2024 23.114.212.80 talk posted a new comment on X1202 (One of the pogos looks like it contacts the area for the Real-time battery. Does this also supply power for that port?)
  • 09:06, 7 May 2024 23.114.212.80 talk posted a new comment on X1202 (What are the specs on the momentary switch port? Does this work like one on the board?)
  • 07:50, 7 May 2024 84.50.46.206 talk posted a new comment on X735-script (I decided to run Home Assistant OS as a virtual machine using Incus so I could use the X735 following the instructions on this wiki page. Fan now is quiet and PWM is doing its thing. I followed the steps here, but I used ‎<code> pip3 install --break-system-packages rpi-lgpio ‎</code> for installinh the GPIO library. To check if the services are working I used ‎<code> systemctl status x735-fan ‎</code> and ‎<code> systemctl status x735-pwr ‎</code> For troubleshooting it helps to check...)
  • 04:41, 7 May 2024 88.98.197.180 talk posted a new comment on P580 (Can POE HAT fit in this case? Thanks.) Tags: Mobile web edit, Mobile edit
  • 02:17, 7 May 2024 1.64.154.121 talk posted a new comment on XScript (Hi, is there a version of Debian 12(Bookworm)? I'm using NASPi and the fan not working and "xoff: command not found" after install script.)
  • 18:38, 6 May 2024 Lisa talk contribs posted a new comment on X1002 (Hi,Please check the FFC cable or reconnect the FFC cable to test.)
  • 05:15, 6 May 2024 47.160.191.140 talk posted a new comment on X1002 (that case does not have sufficient space for any hat, or bases. You are going to need to use a different case.)
  • 05:13, 6 May 2024 47.160.191.140 talk posted a new comment on X1002 (X1002 suddenly stopped working after less than 2 weeks. journalctl shwos NVME controller went offline during write operations. What troubleshooing steps can I take to see what is going on?)
  • 04:17, 6 May 2024 216.24.212.37 talk posted a new comment on X1201 (X1201 V1.1 current behavior: On applying power starts charging and starts Pi5 via attached USB-C. When fully charged stops charging, quits using UBS-C power and uses power from the battery. When battery are depleted, shuts off everything. Also when you remove USB-C power, it does not transition to battery is shuts off everything. There is no software installed in crons or anything. This is not a seamless UPS. Is there a jumper of GPIO setting that I don't have set?)
  • 02:42, 6 May 2024 70.69.24.131 talk posted a new comment on X1002 (Have Pi 5 set upv5 Pro with Armor Lite & Heatsink case, caanot for the life of me figure out how to connect this peripheal to it.)
  • 13:05, 5 May 2024 223.233.83.87 talk posted a new comment on P580 (Right, that seems logical. I just hope there is enough clearance between my ssd and the Pi. I have ordered a box of m2.5 standoffs and some m2.5*4+6, lets see how it works out. I also figured that if you flip the Pimoroni base over, you can mount it as a hat with the right standoffs. Then you can use the Geekworm P579 case as well. That might be a better option to keep all the parts cool, as the NVMe won't be squeezed up close to the Pi5 board. Thanks for your help Lisa.)
  • 11:07, 5 May 2024 98.177.143.149 talk posted a new comment on X1003 (Micron 250GB 2242 MTFDKCD256TFK worked for me with the X1003 after updating eeprom.)
  • 18:17, 4 May 2024 84.170.25.179 talk posted a new comment on X1201 (Seems to be MAX17048 and does not support much more info (no shunt))
  • 18:13, 4 May 2024 84.170.25.179 talk posted a new comment on X1201 (What is the battery fuel gauge ic partnumber? Does it support more info than the current voltage?)
  • 05:28, 4 May 2024 77.10.106.69 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (The WD Green SN580 works like a charm with the latest rpi-eeprom-update. Used the rpi-clone fork from Jeff Geerling to copy a fresh Bookworm install onto the SSD. 740 MB/s write and 780 MB/s read for a 1GB file in 10 blocks of 100MB each. With PCIe3 enabled tho)
  • 22:55, 3 May 2024 80.74.161.124 talk posted a new comment on X1011 (Not so interesting without good case) Tags: Mobile web edit, Mobile edit
  • 18:46, 3 May 2024 Lisa talk contribs posted a new comment on NASPi Gemini 2.5 (Hi,Sorry, it not support "wake ON lan")
  • 18:41, 3 May 2024 Lisa talk contribs deleted comment #4696 on Q200
  • 18:40, 3 May 2024 Lisa talk contribs deleted comment #4695 on XS-GaN-27W
  • 18:39, 3 May 2024 Lisa talk contribs deleted comment #4692 on NASPi Gemini 2.5
  • 18:39, 3 May 2024 Lisa talk contribs deleted comment #4694 on NASPi Gemini 2.5
  • 18:35, 3 May 2024 Lisa talk contribs posted a new comment on P580 (It is recommended to replace the pimoroni spacers with M2.5*6mm (included in the P580 packing list); and you need to prepare 4pcs M2.5*4+4 or M2.5*4+5 spacers to fix the bottom.)
  • 18:29, 3 May 2024 Lisa talk contribs posted a new comment on X1008 (Hi，sorry，there are no plans to produce an matching case yet, you can DIY a 3D case based on the size of the board.)
  • 18:23, 3 May 2024 Lisa talk contribs posted a new comment on X1011 (Hi,5Vdc +/-5% ≥5A; DC power jack: 5.5x2.1mm, polarity: center positive (+); please refer to X1011#Ports & Connectors)
  • 18:23, 3 May 2024 Lisa talk contribs deleted comment #4702 on X1011
  • 18:23, 3 May 2024 Lisa talk contribs posted a new comment on X1011 (Hi,5Vdc +/-5% ≥5A; DC power jack: 5.5x2.1mm, polarity: center positive (+); please refer to Ports & Connectors)
  • 05:21, 3 May 2024 93.104.122.139 talk posted a new comment on NASPi Gemini 2.5 (Is there possibility to use "wake ON lan" with it?)
  • 10:09, 2 May 2024 69.174.137.7 talk posted a new comment on X857 V2.0 (blue led light indicates?)
  • 07:11, 2 May 2024 75.37.71.93 talk posted a new comment on M901 (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:11, 2 May 2024 75.37.71.93 talk posted a new comment on FFC Cable (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:11, 2 May 2024 75.37.71.93 talk posted a new comment on Q100 (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:10, 2 May 2024 75.37.71.93 talk posted a new comment on Q200 (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:10, 2 May 2024 75.37.71.93 talk posted a new comment on XS-GaN-27W (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:10, 2 May 2024 75.37.71.93 talk posted a new comment on NASPi Gemini 2.5 (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 12:44, 1 May 2024 223.233.81.42 talk posted a new comment on P580 (I see, thanks. The pimoroni hat has its ssd in between the hat and pi5, and their clearance is 7mm. There still might be a way to make it fit, but I am not sure I have the exact mounting hardware. Thanks Harry.)
  • 05:53, 1 May 2024 75.37.71.93 talk posted a new comment on NASPi Gemini 2.5 (What does it take to get a reply from Cindy, the (terrible) customer support person I got in regards to a garbage X882-A1 connector that came with this kit.)
  • 17:11, 30 April 2024 Harry talk contribs posted a new comment on X1200 (https://geekworm.com/products/x1200 to buy it.)
  • 16:57, 30 April 2024 193.191.241.17 talk posted a new comment on X1008 (Is there a compatible case for this ?)
  • 16:51, 30 April 2024 193.191.241.17 talk posted a new comment on X1011 (Which model of DC power is compatible ?)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"