X630-A4
Jump to navigation
Jump to search
Contents
Overview
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
X630-A4 is an accessory for KVM-A4 (Raspberry Pi Zero 2 W based KVM)，the complete kit, please refer to PiKVM
Features
- Designed especially for PiKVM ( Raspberry Pi-based KVM over IP)
- Pefectly Works with the latest Raspberry Pi Zero 2W
- Fully compatiblie with PiKVM OS (Raspberry Pi Zero 2 W, V2 platform)
- Control a server and computer using a web browser
- HDMI Full HD capture based on the TC358743 chip(from X630)
- OTG Keyboard & mouse; Mass Storage Drive emulation
- Hardware Real Time Clock (RTC) with CR1220 coin battery socket
- Equipped with solid-state relays to protect RPi GPIO pins from computer and ESD spikes
- ATX control via RJ45 connector - Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
- Reserves the 4-pin header & spacers for I2C OLED display
- Reserves the PH2.0-2P 5V power connector for fan and other devices
- Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required
- USB On-the-go (OTG) using USB Type-C
Packing List
X630-A4 V1.1
- 1 x X630-A4 V1.1 HAT Shield
- 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
- 8 x M2.5x3mm Screw
- 3 x M2.5x4+4mm Spacers
- 1 x M2.5x10+4mm Spacer
- 1 x M2.5x15+4mm Spacer
- 2 x M2.5x15mm F/F Spacers
X630-A4 V2.0
- 1 x X630-A4 V2.0 Expansion Board
- 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
- 2 x M2.5x4+4mm Spacers
- 2 x M2.5x17mm F/F Spacers
- 1 x M2.5x9mm F/F Spacer
- 1 x M2.5x15mm F/F Spacer
- 8 x M2.5x4mm Screws
User Manual
- X630-A4 V1.1 Dimensions source file (DXF): File:X630-A4-v1.dxf - You can view it with Autodesk Viewer online
- X630-A4 V2.0 Dimensions source file (DXF): File:X630-A4-v2.0.dxf - You can view it with Autodesk Viewer online
Enable comment auto-refresher