X300

Full Function Expansion Board X300 + Antenna Set (SKU:370656)

KEY FEATURES: Input Voltage:

• 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi

SATA:

• Allows you to connect SATA devices to your Raspberry Pi

Audio

• 3.5mm MIC in jack
• 3.5mm stereo audio jack
• SPDIF output
• Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)

Wireless:

• WiFi (IEEE 802.11b/g/n) with external antenna
• IR sensor (38KHz)
• Bluetooth serial communication

USB Storage:

• Self-powered USB hub with 3 ports

Real-time clock (RTC):

• Based on DS3231SN with included CR2032 battery

Misc:

• Power output socket
• Camera flex slot so camera can still be used with the expansion board attached
• DIP switch to remove connection from RPi’s pin header
• Directly connected on top of the Raspberry Pi using the board GPIO header pins
• No wiring nor soldering is required
• Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
• Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!

Dimensions:

• 85 x 56mm (Same size as Raspberry Pi)

PACKING LIST:

• 1 x Expansion board (Includes 1 x CR2032 battery)
• 1 x 2.4GHz Wi-Fi antenna
• 1 x USB male to male adapter
• 1 x Pack of plastic screws