-

CommentStreams:E2f2f7754e4ff037f1d8347481f92997

From Geekworm Wiki
Jump to navigation Jump to search

Hallo, ich habe ein X735 V3.0 und nutze einen RPi4.

Kann das X735 zwischen verschiedenen Power inputs umschalten? Versorgung über usb-c und DC-Wide parallel, wenn DC-Wide ausfällt wird usb-C weiter genutzt?

Funktioniert Safe-Shutdown wenn eine Spannungsquelle ausfällt und auf eine andere Spannungsquelle umgeschaltet wird? (Bsp. X735 wird über DC-Wide betrieben, 5V-in erhält ebenfalls ausreichend Strom, Strom von DC-Wide fällt aus, Safe-Shutdown wird eingeleitet, da 5V-in nur kurzfristig genug Strom bereitstellt?)

Kann ich usb-5v-in mit einer dem usb-port einer Powerbank verbinden? Wie viel Ampere benötigt der 5V-in XH2.54mm 2pin Eingang?

Wie viel Ampere stellen die 5v-out XH2.54mm 2pin bereit?

Funktioniert der usb-c des X735 V3.0 mit einem usbc-power-delivery Netzteil?

Wie viel Ampere benötigen die micro-usb und usb-c ports des X735?

Ich kann über den oben stehenden link kein Benutzerkonto erstellen (Registrierung), es wird ein Berechtigungsfehler angezeigt. auch sonst finde ich keine Möglichkeit ein Benutzerkonto zu erstellen. Ist das ein Fehler?


Viele Grüße



Hi there, I got the X735 V3.0 and use a RPi4.

Can the X735 switch between different power inputs? Supply via usb-c an DC-Wide parallel, if DC-Wide is fails (looses power) X735V3.0 is powered with the usb-c power which doesnt fail?

Does Safe-Shutdown works if one of the power supply fails and another power supply is used? (for example: X735 is powered with DC-Wide, 5V-in also gets enough power, DC-Wide power fails, Safe-Shutdown initiates because 5V-in only powers for short time?)

Can I connect usb-5v-in with the usb-port of a powerbank? How much ampere does the 5V-in XH2.54mm 2pin need?

How much ampere do the 5V-out XH2.54mm 2pin provide?

Does the X735V3.0 run with a usb-c powerdelivery powersupply?

how much ampere do the micro-usb and usb-c ports auf the X735V3.0 need?

I cannot register a user account, error displayed, i cannot find another way to register a user account. why is this?

kind regards