-
Main public logs
Jump to navigation
Jump to search
Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 09:34, 30 January 2026 Harry talk contribs moved page LVDS2 to LVDS2HD
- 02:54, 29 January 2026 79.150.12.88 talk performed unknown action "comments/add" on LVDS2 (Hi. It works fine at 1920 x 1200, but the signal cuts out every few seconds and comes back, tested on several monitors. I've tried various cables, even very short, high-quality ones. Same problem. Any ideas?)
- 11:15, 8 January 2026 Ruby talk contribs performed unknown action "comments/add" on LVDS2 (Hi there! This adapter board is designed for LVDS to HDMI conversion only, and it does NOT support the reverse HDMI to LVDS function. If you’re looking for an HDMI to LVDS adapter board, please check out this product: HDMI_to_LVDS (https://wiki.geekworm.com/HDMI_to_LVDS).)
- 13:25, 7 January 2026 136.226.243.77 talk performed unknown action "comments/add" on LVDS2 (if the Frame rate is 62.6 HZ, Geek worm board will work HDMI to LVDS ?)
- 17:45, 4 December 2025 Ruby talk contribs performed unknown action "comments/add" on LVDS2 (Hi there! It's single 8. We recommend shorting R20 on the board with a 0-ohm resistor.)
- 12:34, 3 December 2025 167.103.55.107 talk performed unknown action "comments/add" on LVDS2 (I have below configuration in my LVDS Connector, can you please confirm whether its single 8 or Dual 8? LVDS_TFT_D0± LVDS_TFT_D1± LVDS_TFT_D2± LVDS_TFT_D3± LVDS_TFT_CK± (clock))
- 18:43, 10 November 2025 Ruby talk contribs performed unknown action "comments/add" on LVDS2 (Hi, Please refer to FAQ1 https://wiki.geekworm.com/LVDS2#FAQ)
- 18:42, 10 November 2025 Ruby talk contribs performed unknown action "comments/delete" on LVDS2
- 18:42, 10 November 2025 Ruby talk contribs performed unknown action "comments/add" on LVDS2 (Hi, Please refer to FAQ1 https://wiki.geekworm.com/LVDS2#FAQ)
- 17:13, 7 November 2025 103.224.52.5 talk performed unknown action "comments/add" on LVDS2 (I'm trying to replace a M270HVN02.0 screen with a HDMI screen. The D1 light is flashing and D2 is always on, but there's no HDMI output. Any ideas? I also tried adding a HDMI voltage injector but no luck.) Tags: Mobile edit Mobile web edit
- 20:42, 3 November 2025 Harry talk contribs performed unknown action "comments/add" on LVDS2 (Please connect the clock to PIN8 and PIN9. LVDS E CLK- and LVDS E CLK+ are not used. PIN 20 & PIN21 are disconnected on the board.)
- 20:42, 3 November 2025 Harry talk contribs performed unknown action "comments/delete" on LVDS2
- 20:28, 3 November 2025 202.85.53.89 talk performed unknown action "comments/add" on LVDS2 (Your clock needs to be connected from pin 8 and pin 9.)
- 18:00, 31 October 2025 83.150.2.87 talk performed unknown action "comments/add" on LVDS2 (My current cable and screen use the pins 20 and 21 as RXECLKIN- and RXECLKIN+ (which in the board should be LVDS_E_CLK- and LVDS_E_CLK+), but in the board those are disconnected. Will it work for my set up?)
- 14:48, 17 October 2025 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hello, yes it support 800x600 6bit single8; but because there are so many screen models, we cannot guarantee compatibility with this model [lcd is g121sn01-v4])
- 18:19, 16 October 2025 37.30.6.20 talk performed unknown action "comments/add" on LVDS2 (will 800x600 6bit single? lcd is g121sn01-v4)
- 19:24, 29 August 2025 5.165.7.42 talk performed unknown action "comments/add" on LVDS2 (can it handle a 10bit lvds, if e4 and o4 pair used?)
- 17:43, 19 August 2025 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hi, LVDS_E_CLK not required.)
- 16:29, 19 August 2025 5.165.7.42 talk performed unknown action "comments/add" on LVDS2 (HI, i see 'LVDS_O_CLK,' but where is 'LVDS_E_CLK'? Is it needed, or can it be left unconnected? Or should it be duplicated from 'LVDS_O_CLK'?)
- 10:44, 18 August 2025 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hello,There will be no updates at this time.)
- 12:48, 16 August 2025 187.194.46.217 talk performed unknown action "comments/add" on LVDS2 (Can there be future firmware updates for this card model? thanks)
- 11:22, 3 May 2025 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hi, Sorry, we have not tested FH41-30S-0.5SH(05) and cannot guarantee compatibility.)
- 11:21, 3 May 2025 Lisa talk contribs performed unknown action "comments/delete" on LVDS2
- 11:21, 3 May 2025 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hi, Sorry, we have not tested this model and cannot guarantee compatibility.)
- 15:17, 2 May 2025 136.226.243.103 talk performed unknown action "comments/add" on LVDS2 (Am using FH41-30S-0.5SH(05) connector , whether this product is compatible with this? please confirm)
- 11:07, 11 February 2025 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hello，Sorry for the inconvenience. where did you buy it? can you please tell us the order number? we have not tested the AtGames Legend Ultimate and cannot guarantee compatibility. please note that the resolution is VESA standard in default. If you need change to single 8 mode, please short the R20 on the LVDS2 board. And because it is the DIY product, so sometimes there may be the compatibility problem. When it shows no signal or no sound, it may be the compability problem. Hope to get you...)
- 01:41, 9 February 2025 24.108.66.145 talk performed unknown action "comments/add" on LVDS2 (i bought this being told it works for AtGames Legend Ultimate. THIS DOES NOT WORK DONT WASTE YOUR MONEY, plus NO CUSTOMER SUPPORT FROM GEEKWORM)
- 10:57, 4 December 2024 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hello，Sorry, we haven't tested it + LVDS2 and can't give any recommendations. Because it is the DIY product, so sometimes there may be the compatibility problem. There are so many different screen models that we can't be compatible with all of them.)
- 04:47, 4 December 2024 91.165.13.235 talk performed unknown action "comments/add" on LVDS2 (Hello, can I use with this screen? LC320DUE-FHA1 Thanks!)
- 11:31, 27 September 2024 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hello，the cable pinout corresponds to the information on the board. please refer to the interface information on the board.the 2-row connector specification: 30pin 2-CH)
- 14:19, 26 September 2024 165.85.178.147 talk performed unknown action "comments/add" on LVDS2 (Is the cable pinout 1:1 with the schematics picture? Is the 2-row connector standard pin-header compatible 2.54mm pitch?)
- 14:37, 11 September 2024 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hi,This LVDS2 board convert LVDS input signal to HDMI output, the resolution is VESA standard in default. If you need change to single 8 mode, please short the R20 on the LVDS2 board. Because it is the DIY product, we can not guarantee the compatibility, there will have compatibility issue, thanks for your understanding!)
- 14:34, 11 September 2024 Lisa talk contribs performed unknown action "comments/delete" on LVDS2
- 22:49, 10 September 2024 71.187.173.188 talk performed unknown action "comments/add" on LVDS2 (What about 800x480 single channel LVDS ? I need to capture signal to HDMI (instead LCD LQ070T5GC01) Will it work?)
- 22:45, 10 September 2024 71.187.173.188 talk performed unknown action "comments/add" on LVDS2 (What about 800x480 single channel LVDS ? I need to get signal from LCD LQ070T5GC01 Will it work?)
- 23:22, 22 June 2024 71.246.207.26 talk performed unknown action "comments/add" on LVDS2 (Has anyone used this or another product on a Tesla's round 4+2 pin LVDS connector at the screen or MCU? This board shows more pins.)
- 14:18, 30 March 2024 24.108.66.145 talk performed unknown action "comments/add" on LVDS2 (I have a atgames legends ultimate. I can not get this to work . I only get flashing d1. I have tried checking the line sequence. HELP) Tags: Mobile edit Mobile web edit
- 18:21, 23 March 2024 108.25.83.239 talk performed unknown action "comments/add" on LVDS2 (does this support output to a lcd that has 1366 x 768 resolution?)
- 12:09, 1 March 2024 Lisa talk contribs performed unknown action "comments/add" on LVDS2 (Hi,LVDS2 and LVDS 1.5/V20 are different manufacturers with different board designs and cables, there is no functional difference.)
- 01:22, 27 February 2024 69.42.12.30 talk performed unknown action "comments/add" on LVDS2 (What is the difference between this LVDS2 model and what your site says is the "newest" LVDS 1.5 model? To be clear, I am NOT asking about V20 vs 1.5. Is this LVDS2 model actually the newest model (newer than even the 1.5 model) but the text description on your site is just out of date? Or is 1.5 actually the newest model?) Tags: Mobile edit Mobile web edit
- 14:29, 4 December 2023 Walker talk contribs performed unknown action "comments/add" on LVDS2 (Hi, we only have 30PIN LVDS to HDMI adapter boards.)
- 01:35, 4 December 2023 80.90.95.42 talk performed unknown action "comments/add" on LVDS2 (Hello i have 10 pin with wire lvds but i want to convert it to hdmi i want to know if there is any conversion board fot this kind of signal) Tags: Mobile edit Mobile web edit
- 16:20, 29 November 2023 Walker talk contribs performed unknown action "comments/add" on LVDS2 (Because it is the DIY product, so sometimes there may be the compatibility problem.There's no way to guarantee that.)
- 16:20, 29 November 2023 Walker talk contribs performed unknown action "comments/delete" on LVDS2
- 16:20, 29 November 2023 Walker talk contribs performed unknown action "comments/add" on LVDS2 (Because it is the DIY product, so sometimes there may be the compatibility problem.There's no way to guarantee that.)
- 17:57, 28 November 2023 159.146.47.151 talk performed unknown action "comments/add" on LVDS2 (hello my LM238WF2-SSK1 model screen is broken Can I plug the 30pin lvds cable coming to this screen to this board and get the image on another monitor from hdmi output)
- 14:19, 27 September 2023 Walker talk contribs performed unknown action "comments/add" on LVDS2 (Hello, we recommend that you buy a new LVDS2, I'm sorry)
- 18:03, 26 September 2023 84.199.122.154 talk performed unknown action "comments/add" on LVDS2 (What is the name of component U1 or can you direct me to a datasheet? I applied a too high voltage and it blew up. I want to have a look to replace it.)
- 11:09, 22 September 2023 Walker talk contribs performed unknown action "comments/add" on LVDS2 (Hello, LVDS2 supports I2S 2-Channel)
- 17:48, 21 September 2023 202.232.38.130 talk performed unknown action "comments/add" on LVDS2 (Hello, I want to input 3ch I2S signals. Is the input specification of the I2C terminal of this product 1ch?)