-

CommentStreams:0fbc4cfec9d4b36f9193392a2baba243

From Geekworm Wiki
< X1001
Revision as of 13:19, 6 June 2024 by 88.171.46.144 (talk) (Migrated comment #4831)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Hello,

I am experiencing an issue with my Raspberry Pi 5 setup. My configuration includes a 25W adapter, Geekworm PCIe HAT X1001, and a Crucial SSD 4.0 NVMe P3 Plus 500GB. Notably, I am not using an SD card in this setup.

I successfully installed Ubuntu Server 24.04 LTS on the SSD using the Raspberry Pi Imager. The system operates efficiently and quickly when the SSD is connected via a USB adapter.

However, when I attempt to mount the SSD directly onto the Geekworm PCIe HAT X1001, it fails to boot, and I encounter a "NVME not found" error. I have made the recommended modifications in /boot/firmware/config.txt, but the issue persists.

Any insights or troubleshooting tips to resolve this issue would be greatly appreciated.

Thank you in advance!

Retrieved from "https://wiki.geekworm.com/index.php?title=CommentStreams:0fbc4cfec9d4b36f9193392a2baba243&oldid=34225"