X1202
Jump to navigation
Jump to search
Contents
Overview
This X1202 is an ultra-compact advanced uninterruptible power supply expansion board designed specifically for the Raspberry Pi 5.With its advanced features and robust power backup capabilities, the X1202 is perfect for even the most demanding Raspberry Pi setups.
For Use With
- Raspberry Pi 5
SAFETY INSTRUCTIONS AND WARNINGS
- You must read these safety instructions and warnings before charging your batteries.
- Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
- Do not mix and use old batteries and new batteries, or batteries with different brand names.
- Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
- When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X1202 on the wood material or carpet and unattended.
Features
UPS Output
- Provides continuous operation for up to 10 hours (duration depends on battery type and applications)
- Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications
- Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
- Convenient pogo pin connection for powering the Pi, eliminating the need for cabling and soldering
- Equipped with XH2.54 connectors and two USB sockets for 5V power output
Battery Charging
- Supports fast battery charging with a capacity of 3000mA
- Battery charging control can be managed via GPIO
- Provides protection against battery overcurrent and overvoltage
- Built-in protection against reverse connection of battery cells
- Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
- On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
- Features a 4-cell 18650 battery holder
Power Input
- Integrated high-efficiency step-down DC-DC converter
- Wide operating input range of 6V to 18V
- Up to 95% efficiency for optimal power conversion
- Provides up to 5.5A output current, enabling 3A fast charging while powering the system
- Allows power input from various sources such as a car, solder panel, and more
- Common power input jack size of 5.5x2.1mm
- Compatible with Raspberry Pi USB-C Power Supply
Power Management
- Seamless power switching between backup power and power adapter
- On-board push button performs the same actions as the Pi's power button
- Automatically cuts off power when the Pi is shut down
- On-board LED indicates power status and Pi detection
- AC power loss and power adapter failure detection via GPIO
- Auto power-on when power is applied or restored
- Automatic safe shutdown when battery voltage is low (programmable)
- Ultra-low standby power consumption to maximize battery life
- Advanced system power-path management to minimize frequent charging and discharging of batteries
Misc
- Connects to the Pi via convenient pogo pins, eliminating the need for additional cabling
- Designed to be attached on the bottom, allowing the use of favorite HATs alongside it
- XH2.54 connector available for adding your own power button
Specification
Power input: 6-18Vdc,(12Vdc 3A power adapter recommended) UPS output: 5.1V ±5% Max 5A Battery charging current: Max 2.3-3.2A Terminal Battery Voltage: 4.23V Battery Recharge Threshold :4.1V Ports & Connectors : DC power jack - 5.5x2.1mm
How to Power
- Do not apply power to your Raspberry Pi via the Type-C USB socket.
- Do not use 18650 battery with built-in protection circuit.
Packing List
- 1 x X1202 UPS Shield
- 1 x Screw packs and accessories
Enable comment auto-refresher
Anonymous user #13
Permalink |
Harry
Anonymous user #12
Permalink |
Harry
Anonymous user #11
Permalink |
Lisa
Anonymous user #9
Permalink |
Lisa
Anonymous user #10
Permalink |
Lisa
Anonymous user #9
Permalink |
Lisa
Anonymous user #9
Permalink |
Lisa
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Harry
Anonymous user #6
Permalink |
Anonymous user #5
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa
Anonymous user #2
Permalink |
Anonymous user #3
Anonymous user #4
Anonymous user #1
Permalink |
Lisa